3 Turn the tip of the power cord so that it is facing towards you, then
turn it back to create a ring as shown in the diagram and insert it into
the [DC IN] terminal of this unit.
2 DC IN terminal
Example of connections
When transferring samples from a PC
When synchronizing with external devices
Starting up and preparing the unit
1 Connect the unit as described in Connections (p. 7 ).
2 Press the [u] switch on the rear panel of the unit.
This unit's indicators light up and the power turns on.
3 u switch
4 LINK terminal
5 DIN MIDI IN and DIN MIDI OUT/THRU terminals
6 USB-B terminal
7 INPUT terminals
8 INPUT LEVEL control
9 OUT3-8/ASSIGNABLE OUT terminals
a OUT1-2/MASTER/ASSIGNABLE OUT terminals
b PHONES terminals
When importing samples from a USB
PRO DJ LINK compatible DJ system