8.
Secure the panel PC by fastening the retention screw of the wall-mounting
bracket. (Figure 2.24)
2.3.2
Panel Mounting
To mounting the flat bezel panel PC into a panel, please follow the steps below.
1.
Cut out a section corresponding to the size shown below. The dimensions unit is
mm. (See Figure 2.21) (See Figure 2.22) (See Figure 2.23)
PPC-3100S/3120S User Manual
Figure 2.25 Secure the Panel PC
Figure 2.26 PPC-3100S Cut-out dimension
20