Natural Gas Conversion - Whirlpool SF114PXSQ1 Installation Instructions Manual

30" (76.2 cm) freestanding gas range with standard clean oven
Hide thumbs Also See for SF114PXSQ1:
Table of Contents

Advertisement

Available languages

Available languages

Natural Gas Conversion

WARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to rear range foot.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death
or serious burns to children and adults.
To Convert Gas Pressure Regulator
1. Ensure that the manual shutoff valve is in the closed position.
B
A. Shutoff valve in "closed" position
B. Gas supply line
C. To range
2. Unplug or disconnect power.
3. Open broiler door and remove broiler pan. The gas pressure
regulator is located in the back right hand corner of the broiler
compartment.
A. Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.
NOTE: Do not remove the spring beneath the cap.
4. Remove the cap from the gas pressure regulator using a flat-
blade screwdriver.
14
A
C
A
5. Turn the cap over so that N or NAT is visible.
6. Reinstall the cap.
To Convert Surface Burners
1. Remove burner grates, burner caps, and burners.
A. Burner cap
B. Burner
2. Locate the natural gas orifice spuds for the top burners in the
bag containing literature included with the range. Three
natural gas spuds are stamped "149" and one "165."
3. Remove the LP gas orifice spuds using a 7mm combination
wrench.
A
A. Cap
A
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents