Create And Use Lists Of Favorite Channels - Philips 40PFL4706 User Manual

Using your TV as a PC monitor
Use a VGA connector to connect a PC to your TV. For sound, add an
audio cable with a stereo mini jack.
Caution
•
Before you connect your PC, set the PC monitor refresh rate to 60Hz.
Supported screen resolutions
The following screen resolutions are supported in PC mode :
Resolution
640×480
800×600
1024×768
1280×768
1360×768
1440×900
1280×1024
1400×1050
1680×1050
1920×1080
Changing sound settings
1
Press MENU on the remote control and then use Î/ï/ Í /Æ to
select [Setup] > [ Sound].
Equalizer
Picture
Balance
Sound
SRS TruSurround HD
AVL
Features
TV speakers
Installation
Delta volume
Software
2
Use Î/ï/ Í /Æ to highlight a sound setting and then press OK to
select the setting.
3
Adjust the following items.
The following sound settings can be confi gured. Depending on the
sound source, some sound settings are not available.
Setting items Description
Equalizer
Adjust tone quality for each frequency.
Adjusts the balance of the right and left
Balance
speakers to best suit your listening position.
Available for digital channels only, when
Digital audio language multiple languages are broadcast. Lists available
audio languages.
Available for analog channels only when a main
Main
and second audio program (SAP) is broadcast.
Select the main audio program.
Alternate audio
Available for analog channels only when a main
SAP
and second audio program (SAP) is broadcast.
Select the second audio program.
Mono Outputs mono-audio.
Mono / Stereo
Stereo
Outputs stereo-audio.
EN
24
Refresh rate
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
Start now
Off
Off
On
Setting items Description
Off
Sets SRS TruSurround HD to off.
SRS
TruSurround HD
On Selects available modes for surround sound.
Off
Sets AVL to off.
AVL (Auto ( (
Reduces sudden changes in volume, for example,
Volume Leveling) g g
On
during commercials or when switching channels.
The sound will not be output from the unit's
Off
speakers.
The sound will be output from the unit's
On
TV speakers speakers.
You can control audio output from your
Speakers
connected EasyLink Compliant Devices with
EasyLink
VOL + / − by using this unit's remote control.
If a channel
Delta volume
or input
device is:
4
Press MENU to exit.
Note
•
[Master EasyLink] k k must be activated in the [Preferences] menu to make the
[ TV Speakers] menu available when you select [On] or [Speakers EasyLink] k k .
Using auto mode
1
Press AUTO MODE to set your TV to a predefi ned picture and
sound setting.
2
Use Î/ï to select one of the following settings :
[Personal] : The customized settings you defi ned by using
•
the [Picture] menu.
[Sports] : Vivid picture settings and clear sound for high action.
•
• [Standard] : For normal TV viewing.
[Movie] : Brilliant picture settings for a cinematic experience.
•
[Game] : Optimized for PCs, games consoles and playstations.
•
[Internet Video] : Optimized for low bitrate internet video.
•
• [Power Saver] : Eco TV settings for lower power consumption.

Create and use lists of favorite channels

You can create lists of your preferred TV channels so that you can fi nd
those channels easily.
Select a list of favorite channels
1
Press FAV on the remote control. V
» Your lists of favorite channels are displayed.
2
Use Î/ï to highlight a list, and then press OK to select the list.
Navigate to that channel
or input device and
Too Loud set a negative delta
volume level as per your
personal preferences.
Navigate to that channel
or input device and
Too Soft
set a positive delta
volume level as per your
personal preferences.