Advertisement
Features & Specifi cations
Components
1
Tools Needed
For the latest User Installation Guide please visit: www.ergotron.com
User's Guide - English
Guía del usuario - Español
Manuel de l'utilisateur - Français
Gebruikersgids - Deutsch
Benutzerhandbuch - Nederlands
Guida per l'utente - Italiano
Användarhandbok - svenska
ユーザーガイ ド : 日本語
用户指南 : 汉语
888-33-373-G-01 rev. C • 05/15
15" (381 mm)
> 24"
(61 cm)
A
Sit-Stand Desktop Workstation
> 35" (89 cm)
10 - 35 lbs
A
(4.5 - 15.88 kg)
< 5 lbs
B
(2.27 kg)
A
B
= 10 - 35 lbs (4.5-15.9 kg)
+
B
User's Guide
WorkFit-T
< 18"
(45.7 cm)
24.8"
(63 cm)
CAUTION: DO NOT EXCEED
MAXIMUM LISTED WEIGHT
CAPACITY. SERIOUS INJURY
OR PROPERTY DAMAGE MAY
OCCUR!
C
D
Includes
Constant Force™
Technology
1 of 7
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ergotron WorkFit-T
Summary of Contents for Ergotron WorkFit-T
-
Page 1: Tools Needed
OR PROPERTY DAMAGE MAY OCCUR! = 10 - 35 lbs (4.5-15.9 kg) Components Tools Needed For the latest User Installation Guide please visit: www.ergotron.com User's Guide - English Includes Guía del usuario - Español Constant Force™ Manuel de l’utilisateur - Français... - Page 2 Safety Warning: Because mounting surface materials can vary widely, it is imperative that you make sure mounting surface is strong enough to handle mounted product and equipment. WARNING PINCH POINT DO NOT place hands on or near support bars. Pinch points are created during lifting and lowering the worksurface.
- Page 3 Safety Caution: To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury. Caution: Leave enough slack in cable to allow for full range of vertical motion (15” / 38 cm). Failure to heed this warning may result in property damage and or personal injury.
- Page 4 Caution: Keep monitor and laptop base fully on the worksurface. Allowing any part of base or stand to hang off the edge may result in property damage and or personal injury. 888-33-373-G-01 rev. C • 05/15 4 of 7...
- Page 5 Caution: To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury. 888-33-373-G-01 rev. C • 05/15 5 of 7...
- Page 6 Caution: Leave enough slack in cable to allow for full range of vertical motion (15” / 38 cm). Failure to heed this warning may result in property damage and or personal injury. 888-33-373-G-01 rev. C • 05/15 6 of 7...
- Page 7 Blink - Blink often to avoid dry eyes. Break • 2 to 3 minutes every 20 minutes • 15 to 20 minutes every 2 hours. For local customer care phone numbers visit: http://contact.ergotron.com NOTE: When contacting customer service, reference the serial number.
Need help?
Do you have a question about the WorkFit-T and is the answer not in the manual?
Questions and answers