Download Print this page

Yamaha ELC-02 Owner's Manual page 4

Hide thumbs Also See for ELC-02:

Panel Controls and Terminals

1 Power On/Off switch

For turning the power on or off. The power indicator is lit

in green when the power is on.

2 [VOLUME] knob

For adjusting the volume of the entire sound.

3 [SOUND TYPE] switch

Type 1 is optimum for use when the speaker is installed

on the ELC-02 stand. Type 2 is optimum when the

speaker is installed at roughly ear level.

4 [INPUT 1] jack

For connecting to an RCA pin plug. (Not used for the

ELC-02.)

5 [INPUT 2] jack

For connecting the ELC-02 to the speaker, using the

supplied audio cable.

6 [AC IN] jack

For connecting the supplied speaker power cord.

NOTE

For instructions on installing or connecting the speaker, refer to

the ELC-02 Owner's Manual.

Manual Development Group

Published 11/2016 MW-A0