Advertisement
Aligning the saw with the cutting line (fig. I)
The saw is equipped with 2 guides for straight
cutting (23) and 2 guides for 45° mitre cutting (24).
Align the left edge of the guides (23) or (24)
with the cutting line (25).
For very accurate cuts:
Mark a cutting line on a scrap piece of wood.
Align the left edge of the guides (23) or (24)
with the cutting line (25).
Make a test cut.
Depending on the results, adjust the position
of the guides relative to the cutting line.
Dust extraction (fig. A)
An adaptor is required to connect a vacuum
cleaner or dust extractor to the tool. The adaptor
can be purchased from your local Black & Decker
retailer.
Insert the dust extraction adaptor into the saw
dust outlet (26).
Connect the vacuum cleaner hose to the
adaptor.
Hints for optimum use
As some splintering along the line of cut on
the top side of the workpiece cannot be
avoided, cut on the side where splintering is
acceptable.
Where splintering is to be minimised,
e.g. when cutting laminates, clamp a piece of
plywood onto the top of workpiece.
MAINTENANCE
Your Black & Decker tool has been designed to
operate over a long period of time with a
minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and
regular cleaning.
Switch the tool off, allow the blade to stop
and remove the plug from the socket
before carrying out any adjustment,
servicing or maintenance.
Regularly clean the ventilation slots in your tool
using a soft brush or dry cloth.
KS40UK.P65
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker office at the address indicated in
this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com.
Technical data
Voltage
(Australia & New Zealand)
Power input
No-load speed
Max. depth of cut
Blade diameter
Blade bore
Blade tip width
Weight
Black & Decker is confident of the quality of its
products and offers an outstanding guarantee.
This guarantee statement is in addition to and in
no way prejudices your statutory rights.
The guarantee is valid within the territories of the
Member States of the European Union and the
European Free Trade Area.
11
E N G L I S H
PROTECTING THE ENVIRONMENT
Black & Decker provides a facility for
recycling Black & Decker products once
they have reached the end of their
working life. This service is provided free
of charge. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
V
V
min
mm
mm
mm
mm
kg
GUARANTEE
15-10-2001, 12:08
KS40
230
AC
240
AC
W
710
-1
4,100
40
140
12.7
2.4
2.7
11
Advertisement
