Cvbs - Audio L R; Audio Out - Optical; Receiver - Set-Top Box - Philips 50PUT6102 User Manual

Use an Audio L/R cinch cable if your device also has
sound.
4.4

CVBS - Audio L R

CVBS - Composite Video is a high quality
connection. Next to the CVBS signal adds the Audio
Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.5

Audio Out - Optical

Audio Out - optical is a high quality sound
connection.
This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theatre System
(HTS), has no HDMI ARC connection, you can use this
connection with the Audio In - Optical connection on
the HTS. The Audio Out - Optical connection sends
the sound from the TV to the HTS.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theatre System.
For more information, in Help, press the colour

key Keywords and look up Audio out settings.
If the sound does not match the video on screen, you
can adjust the audio to video synchronisation.
For more information, in Help, press the colour

key Keywords and look up Audio to video sync.
4.6

Receiver - Set-Top Box

Cable Box
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Switch Off Timer
13