4-3-12.
: Suction temperature sensor breakaway error
Inverter / Hydro control part display
Judgment Method
Cause of problem
1. Inspection Method
and sensor Holder accurately
resistance value reasonable?
Difference of suction temperature of compressor starting verge and suction temperature that is on present operation :
If less than 2
for 30 minutes to keep. (Judgment at heating operation only)
Suction temperature sensor breakaway / defective.
Is Suction sensor
attached?
Yes
Is Suction sensor
(Refer to E231 )
Yes
Complete
No
Re-attach the sensor holder.
No
Defective Sensor : Replace Sensor
52
Re-insert the sensor.