AEG MRC 4119 P N Instruction Manual page 61

Temperature display
The unit detects the current ambient temperature and it is shown in the display.
• In standby, the temperature indication can be switched between °C (degrees Celsius)
and °F (degrees Fahrenheit) by holding the C/F / YEAR button depressed.
Setting the Clock (in standby)
• Hold the MEM/M+ button (7) depressed until the year indication (YR) on the display
flashes.
• Now you can set the year (YR), the month (M), the day (D), the time display format
(12 H/24 H), the hours, and the minutes with the buttons C/F / YEAR (5) and DST /
M/D (14).
• In each case, confirm the input with the MEM/M+ button. The current indication to
be set flashes on the display.
NOTE:
• The input is stored automatically within approximately 30 seconds when no button is
pressed.
• With a 12 hour display the following is displayed: PM = Afternoon
• Setting of the weekday is done automatically.
Display Date and Year (in standby)
• Press the DST / M/D button (14) to display the date for a short time.
• Press the C/F / YEAR button (5) to display the year for a short time.
Switching to Summer Time (in standby)
Keep the DST / M/D button (14) depressed to switch between summer time and normal
time. When summer time has been selected, the symbol " " is shown on the display.
Radio station tuning
1. Use the C/F / YEAR (5) and DST / M/D (14) buttons to tune the desired station. If
you keep one of the buttons pressed, the device searches for the next radio station.
The display shows the tuned frequency.
2. If reception is too weak, change the position of the dipole antenna in order to improve
the reception.
English
61