Network Adapters - IBM System x3650 M4 HD Product Manual

The specific slots that are available depend on the riser cards that are installed in Riser socket 1 and
Riser socket 2, as shown in the following table. Standard models except for model H3x have 00Y7759
installed in Riser socket 1.
Tip: All slots support full-height adapters. Slots 1, 4, and 5 support full-length adapters, and slots 2, 3, and
6 (when present) support half-length adapters.
Table 12. PCIe slot descriptions (FH=full height, FL=full length, HL=half length, DW=double width)
Slot PCIe 3 x8 riser
00Y7759 (standard)
number
Riser 1: PCIe 3.0 x8; FH, FL
socket 1
2: PCIe 3.0 x8; FH, HL
(CPU 1)
3: PCIe 3.0 x8; FH, HL
Riser 4: PCIe 3.0 x8 FH, FL
socket 2
5: PCIe 3.0 x8 FH, FL
(CPU 2
required)
6: PCIe 3.0 x8 FH, HL
Note: Slots 4, 5, and 6 require a second processor to be installed.

Network adapters

x3650 M4 HD supports four integrated Gigabit Ethernet ports. Optionally, two 10 Gb Ethernet ports or
InfiniBand can be added by installing one of the available dual-port mezzanine cards that are listed in the
following table. These cards use a dedicated connector on the system board and do not use a PCI
expansion slot.
Integrated NICs have the following features:
Intel I350AM4 chip

Four GbE ports

TCP Offload Engine (TOE) support

Wake on LAN support

802.1Q VLAN tagging support

NIC Teaming (load balancing and failover)

IBM System x3650 M4 HD
PCIe x16 riser PCI-X riser
00Y7757 00Y7758
1: PCIe 3.0 x16 FH, FL 1: PCI-X 64b/133 FH, FL
2: PCIe 3.0 x8 FH, HL 2: PCI-X 64b/133 FH, HL
3: No slot present 3: PCIe 3.0 x16 FH, HL
4: PCIe 3.0 x16 FH, FL 4: PCI-X 64b/133 FH, FL
5: PCIe 3.0 x8 FH, FL 5: PCI-X 64b/133 FH, FL
6: No slot present 6: PCIe 3.0 x16 FH, HL
GPU riser
00Y7760
1: No slot present
2: PCIe 3.0 x16 FH, FL, DW
3: PCIe 3.0 x8 FH, HL
4: No slot present
5: PCIe 3.0 x16 FH, FL, DW
6: PCIe 3.0 x8 FH, HL
22