Document Conventions; Related Documentation For Nexus 3000 Series Nx-Os Software - Cisco Nexus 3000 series Configuration Manual

Document Conventions

Chapter
Configuring Rapid PVST+
Configuring Multiple Spanning
Tree
Configuring STP Extensions
Configuring Link Layer
Discovery Protocol
Configuring the MAC Address
Table
Configuring IGMP Snooping
Configuring Traffic Storm
Control
Document Conventions
This document uses the following conventions:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the
manual.
Caution Means reader be careful. In this situation, you might do something that could result in equipment damage
or loss of data.

Related Documentation for Nexus 3000 Series NX-OS Software

Cisco NX-OS documentation is available at the following URL:
http://www.cisco.com/en/US/products/ps11541/tsd_products_support_series_home.html
The documentation set for the Cisco Nexus 3000 Series NX-OS software includes the following documents:
Release Notes
• Cisco Nexus 3000 Series Switch Release Notes
Cisco NX-OS documentation is available at the following URL:
Cisco Nexus 3000 Series NX-OS Layer 2 Switching Configuration Guide, Release 5.0(3)U1(1)
xii
Description
Provides information on IEEE 802.1D STP and complete details for
configuring Rapid PVST+.
Provides complete information on configuring MST.
Provides details on configuring the Cisco-proprietary STP extensions
Bridge Assurance, BPDU Guard, BPDU Filtering, Loop Guard, Root
Guard, and PVST Simulation.
Provides information to configure the Link Layer Discovery Protocol
(LLDP).
Provides information about MAC addresses, how to configure static MAC
addresses, and how to update the MAC address table.
Provides information about IGMPv1, IGMPv2, and IGMPv3 and describes
how to configure IGMP snooping parameters.
Provides information about traffic storm control, guidelines and
limitations, and how to configure the traffic storm control settings.
Preface