Electrolux EHL7640FOK User Manual page 10

10 www.electrolux.com
4.8 Timer
You can set one timer function for each
cooking zone separately. To set a timer
function for the zones on the left side use
the timer on the left, for the zones on the
right, the timer on the right.
Count Down Timer
Use this function to specify how long a
cooking zone should operate during a
single cooking session.
First set the heat setting for the cooking
zone and then set the function.
To activate the function or change the
time: touch
until the indicator
lights up on the display. Then touch
or to set the time (00 - 99 minutes).
The function starts automatically after 4
seconds.
To activate the timer function for the
second zone in a pair touch
quickly.
When the time comes to an end, a signal
sounds and 00 flashes. Touch
the signal.
To see the remaining time: touch
To deactivate the function: choose the
desired zone touching
. The remaining time counts back to
00. The symbol
CountUp Timer (The count up
timer)
You can use this function to monitor how
long a cooking zone operates.
To activate the function: for the first
zone in a pair touch
The function starts automatically when
lights up. To activate the function for
the second zone in a pair touch
times quickly.
To see how long the cooking zone
operates: touch
quickly again and again
of a given zone
comes on the display.
3 times
and then touch
goes out.
twice quickly.
. The display shows
the time, at first in seconds then in
minutes.
To deactivate the function: choose the
desired zone touching
. The symbol
Minute Minder
You can use this function as a Minute
Minder when the hob is activated but the
cooking zones do not operate.
To activate the function: touch
again and again until the indicator
given zone lights up on the display.
Touch
function starts automatically after 4
seconds.
When the time comes to an end, a signal
sounds and 00 flashes. Touch
the signal.
4.9 STOP+GO
to stop
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
.
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch
comes on.
To deactivate the function: touch
The previous heat setting comes on.
4.10 Lock
You can lock the control panel while
cooking zones operate. It prevents an
accidental change of the heat setting.
Set the heat setting first.
4
To activate the function: touch
comes on for 4 seconds. The Timer stays
on.
To deactivate the function: touch
The previous heat setting comes on.
and then touch
goes out.
or to set the time. The
comes on the display.
The function has no effect
on the operation of the
cooking zones.
quickly
of a
to stop
.
.
.
.