Note: The sanitizer cycle runs for 10 minutes and then automatically shuts off.
The sanitizer is in operation when the blue light glows through the
Philips logo and the UV clean LED flashes slowly.
When the sanitizing cycle is complete, the UV clean LED light turns
solid green and the sanitizer automatically shuts off.
Do not clean the brush head, travel charger, charger cover and the UV
sanitizer in the dishwasher.
Remove the brush head and rinse the metal shaft area with warm
Do not push on the rubber seal on the metal shaft with sharp objects, as
this may cause damage.
Use a damp cloth to wipe the entire surface of the handle.
Rinse the brush head and bristles after each use.
Remove the brush head from the handle and rinse the brush head
connection at least once a week with warm water.
Unplug the charger.
Use a damp cloth to wipe the surface of the charger.
Sanitizer (select models)
Do not clean the sanitizer when the UV light bulb is hot.
For optimal effectiveness, it is recommended to clean your sanitizer weekly.
Unplug the sanitizer.
Slightly lift the drip tray and pull it out. Rinse the drip tray and wipe it
clean with a damp cloth.
Clean all reflector surfaces with a damp cloth.