Family List - WatchOvers Assure User Manual

Geo-Zones
A Geo-Zone is an area with a virtual boundary or fence set by you. For example you can
set up a Geo-zone around your house, school or park and receive an alert if the watch
leaves the zone. Zones can also be set that you get an alert if the watch enters the zone,
exits a zone and Enters or Exits a zone.
1) To set a Geo-Zone, press the Geo-Zone icon.
2) Press the Plus + symbol to add a new Geo-Zone.
3) Tap on the screen to move the location of the zone you wish to set. If the location
is off the screen, move the screen to the location you wish to set the zone and tap
on the screen once to move the zone area to your map location.
4) Set the diameter using the slider.
5) Tap on Settings to set your Geo-Zone name and tap the Alert Policy to set
receiving an alert if the watch exits a zone, enters a zone or both enters or exits a
zone.
6) Tap complete to save your new Geo-Zone.
Note: False Alerts - GPS devices are designed for outdoor use. When the device is
indoors, usually showing as LBS, you may get false Geo-Zone breach alerts. This occurs
if the setting of the Geo-Zone is around a building such as your house, as the diameter
may be too small which can result in false alerts when the watch is indoors.

Family List

You can manage a number of functions in Family list
Add a contact number
This GPS Watch allows up to 16 contact numbers including the administrator, preset in
the contact list.
1) Press the Family List icon to enter the setting page.
2) Click the "+" symbol on the top right of the screen page to add a contact number.
11