Inserting And Removing Batteries; Protective Cover - Canon pz-e1 Instruction Manual

Power zoom adapter

Hide thumbs Also See for pz-e1:

Table of Contents

Inserting and

Removing Batteries

❶

1. Open the battery compartment by sliding the cover in

the direction of the arrows. (Fig. ❶: ①②)

2. Insert (or remove) the batteries, making sure that

they are in the correct direction (see diagram inside

cover). (Fig. ❶)

3. After closing the battery compartment, slide the

cover in the direction of the arrow until it clicks. (Fig.

❷: ①②)

Non-alkaline AAA batteries lack unified standards

for contact point shapes, so the brand you use may

cause problems with contact.

❷

■ Removing

1. Turn the attach/detach lever in the direction of the

2. Remove the protective cover from the movable

■ Attaching

1. Attach the protective cover to the adapter in the

2. Turn the attach/detach lever in the direction of the

Removing and Attaching

arrow ② while pressing down on the attach/detach

lever lock release button. (①②)

mounting catch. (③)

reverse order for removing it.

arrow ④ until it clicks to fasten the cover to the

adapter. (④)

ENG-6

Table of Contents