Table of Contents
Advertisement
6
Using Power Zoom
Use the zoom lever to use the power zoom. Sliding it to
[W] will zoom the lens out (wide end) and sliding it to [T]
will zoom the lens in (telephoto end).
The zoom speed will change depending on how much
the zoom lever is moved. Refer to "Materials" on Page
10 for details of the zoom speeds.
You can use power zooms by remote control when
using this adapter. Refer to "Materials" on Page 11
for details of remote control.
If a foreign object is caught between the lens's
●
zoom ring and the adapter while power zoom is
being used, it will stop after the motor drives it to
expel the object. You cannot use Power Zoom
while the jam detector is pressed.
When using Power Zoom from the telephoto end
●
to the wide end, take care that you do not get
your fingers caught between the adapter and the
tip of the lens or the lens hood.
The motor noise may be recorded when using
●
Power Zoom during video shooting. Setting the
speed level to [SLOW] will reduce the motor
noise.
There may be some slight sounds from the
●
adapter when the camera is turned on or wakes
up from Auto Power Off.
While using the zoom lever, do not apply force
●
in the direction where the adapter parts from the
lens. It can cause abnormal sounds or damage.
ENG-9
Advertisement
Table of Contents
