Buttonhole Size - ELNA 2003 Service Manual

BUTTONHOLE SIZE

2005 / 2007
Sew an automatic buttonhole with the buttonhole
foot and a button in position.
The length of the buttonhole is 1 to 2mm longer then
the button.
When the buttonhole is too long (A).
Or too short (B).
Remove the screw cap D.
Loosen the screw E
Move the lever F in direction G when the buttonhole
is too short.
Move the lever F in direction H when the buttonhole
ins too long.
The distance of 1mm on the lever F corresponds to
about 1mm on the buttonhole that you are sewing.
Tighten the screw E and recheck the buttonhole
by sewing.
Replace the screw cap.
27