Changing Cast Tv Settings; Changing Picture Format - Philips 65PFL5922 User Manual

www.philips.com/support

Changing Cast TV Settings

Displays Cast TV Settings. If you set Wake on Cast
(LAN) to On, you can turn your TV on when you use
your smartphone, tablet or PC via your home network.
1
Press MENU and use
settings, then press OK.
2
Use to Select Cast TV settings, then press
OK.
Wake on Cast (LAN)
Picture
Sound
Cast TV settings
Features
Installation
Accessibility
3
Use to Select Wake on Cast (LAN), then press
OK.
4
Use to Select On or Off, then press OK.
Wake on Cast
(LAN)

Changing Picture Format

Display Modes can be Selected when your TV receives
a 16:9 or 4:3 Video Signal.
Three types of Display Modes can be Selected for a PC Input
Signal.
Press FORMAT Repeatedly to Switch the TV Aspect Ratio.
For 16:9 Video signal (2160p)
Unscaled
For 16:9 Video signal (not 2160p)
Automatic
Full
Other than DTV and HDMI connected
devices, enlarges the picture to Best fit the
Automatic screen. DTV and HDMI connected devices
display the picture at its original size.
The subtitles may remain visible.
Displays a 16:9 picture at a 4:3 size; the
picture is shortened horizontally. Sidebars
4:3
appear on both edges of the screen.
Displays a 16:9 picture that is stretched
Wide screen
horizontally and vertically.
to Select TV
to set Wake on Cast
Off
(LAN) to Off
to set Wake on Cast
On
(LAN) to On
Full
4:3
Wide screen
Displays a 16:9 picture at its original size.
Unscaled
Displays a scaled 16:9 picture. Bars appear
on both the Upper and Lower portions of
Full
the screen depending on the type of video
signal.
For 4:3 Video signal
Automatic
Wide screen
Other than DTV and HDMI connected
devices, enlarges the picture to Best fit the
screen.
Automatic
DTV and HDMI connected devices display
the picture at its original size. The subtitles
may remain visible.
Displays a 4:3 picture at a 16:9 size; the picture
is stretched horizontally and vertically and its
Super zoom left and right edges are enlarged. This crops
out some of the top and bottom of the
picture.
Displays a 4:3 picture at its original size.
4:3
Sidebars appear on both edges of the screen.
Displays a 4:3 picture at a 14:9 size; the picture
is stretched horizontally and vertically.
Movie
This crops out some of the top and bottom of
expand 14:9
the picture. Sidebars appear on both edges of
the screen.
Displays a 4:3 picture at a 16:9 size; the picture
is stretched horizontally and vertically. This
Movie
expand 16:9 crops out some of the top and bottom of the
picture.
Displays a picture that is stretched out of
Wide screen
proportion to fill the screen.
For PC Input signal
4:3
• This unit can also be connected to your PC that has a DVI
Terminal.
Use an HDMI-DVI Conversion Cable for this Video
Connection and it requires Stereo Mini 3.5mm Plug Audio
Cable for Analog Audio signal as well.
• Refer to 16:9 Video Signal on this page if the PC has HDMI
Output.
Displays a proportionately stretched picture.
4:3
Sidebars appear on both edges of the screen.
Displays a picture that is stretched out of
Wide screen
proportion to fill the screen.
Unscaled Displays a picture in its original size.
If the signal source has side or top-bottom bars
inserted into the picture, the Picture Format function
will not eliminate them.
10
Super zoom
Movie expand 16:9 Movie expand 14:9
Wide screen
Continued on next page.
4:3
Unscaled