ActionTec GT704 User Manual
  1. Manuals
  2. Brands
  3. ActionTec Manuals
  4. Gateway
  5. DSL GATEWAY GT704
  6. User manual

ActionTec GT704 User Manual

Usb/ethernet dsl gateway
Hide thumbs Also See for GT704:
Table of Contents

Advertisement

Quick Links

Download this manual
USB/Ethernet
DSL Gateway
Model #: GT704
IB Version #: 3.0.1.0.5g-GT704

User Manual

™
Solutions for the Digital Life

Advertisement

Table of Contents
loading

Related Manuals for ActionTec GT704

Summary of Contents for ActionTec GT704

  • Page 1: User Manual

    USB/Ethernet DSL Gateway Model #: GT704 IB Version #: 3.0.1.0.5g-GT704 User Manual ™ Solutions for the Digital Life...

  • Page 2: Table Of Contents

    Table of Contents 1 Introduction Package Contents Minimum System Requirements Features Getting to Know the Gateway 2 Setting Up the Gateway Connecting a Computer to the Gateway Installing Phone Filters Setting Up the DSL Connection 3 Performing a Basic Setup Basic Setup Changing the Admin User Name and Password 4 Using Advanced Setup...
  • Page 3 Actiontec USB/Ethernet DSL Gateway User Manual 8 Troubleshooting Troubleshooting Frequently Asked Questions A Reference Locating Computer Information Locating Windows Operating System Files B Setting Up Static IP on the Computer Windows 98 SE Windows Me Windows 2000 Windows XP C Computer Security...

  • Page 4: Introduction

    This easy-to-use product is perfect for the home office or small business. If you want to take your computing to the next level, the Actiontec /Ethernet Gateway is sure to be one of the keys to your success.

  • Page 5: Minimum System Requirements

    Actiontec USB/Ethernet DSL Gateway User Manual Minimum System Requirements Internet service Compatible laptop, desktop, or Macintosh computer with an available Ethernet or (USB compatible with s only) Microsoft Windows Second Edition ( ), Millennium Edition (Me), 98, 98 ; Mac...
  • Page 6 Chapter 1 Introduction Built-in server DHCP relay support authentication, administrative passwords through Telnet PAP/CHAP Compliant with 802.3 Ethernet standard IEEE 10/100 Base-T Ethernet ports (4) Flow control support for Fast Ethernet Web-based configuration setup Default configuration backup restore firmware upgradeable Web download support...

  • Page 7: Getting To Know The Gateway

    Actiontec USB/Ethernet DSL Gateway User Manual Getting to Know the Gateway This section contains a quick description of the Gateway’s lights, ports, etc. The Gateway contains several indicator lights ( s) on its front panel and a series of ports on its rear panel.
  • Page 8 Chapter 1 Introduction Internet Light When the Internet light glows steadily, the Gateway is connected to the provider. When it flashes, the Gateway’s built-in modem is training for your service. Ethernet Lights The Ethernet lights illuminate when the Gateway is connected via one or more of its Ethernet ports.
  • Page 9 Actiontec USB/Ethernet DSL Gateway User Manual USB Port port is used to connect a computer to the Gateway via cable. ☞ Note: It is not recommended to perform a recovery or update for the Gateway from a computer connected via...

  • Page 10: Setting Up The Gateway

    Setting Up the Gateway The instructions that follow parallel the steps contained in the Actiontec Installation ™ Buddy , which provides a visual guide to setting up the Gateway. It is recommended the user run the Installation Buddy first, before attempting any other procedures.
  • Page 11 Actiontec USB/Ethernet DSL Gateway User Manual 2. Read the instructions, select Initial Setup by clicking on the appropriate check box, then click Next. 3. If USA was chosen in step 1, select the appropriate letter (this information should be provided to you by the ISP) from the options in the next window, then click Next.
  • Page 12 Chapter 2 Setting Up the Gateway 4. Click in the check box next to Ethernet (Recommended), then click Next. 5. Make sure the items needed to connect the Gateway to the first computer are included in the kit, then click Next.
  • Page 13 Actiontec USB/Ethernet DSL Gateway User Manual 6. Get the Gateway from the kit, then click Next. 7. Get the Power cord and plug the smaller end into the black Power port on the rear panel of the Gateway, then click Next.
  • Page 14 Chapter 2 Setting Up the Gateway 8. Plug the larger end of the Power cord into a power outlet, then click Next. 9. Click the On/Off switch to its on position (as shown in the picture on- screen), then click Next.
  • Page 15 Actiontec USB/Ethernet DSL Gateway User Manual 10. Confirm the Power light on the front of the Gateway glows solid green, then click Next. 11. Get the yellow Ethernet cable from the kit and plug one end into a yellow Ethernet port on the back of the Gateway, then click Next.
  • Page 16 Chapter 2 Setting Up the Gateway 12. Plug the other end of the yellow Ethernet cable into an Ethernet port on the back of the computer. Click Next. ☞ Note: An Ethernet port looks similar to a phone jack, but is slightly larger.
  • Page 17 Actiontec USB/Ethernet DSL Gateway User Manual 14. Get the black or gray DSL cable from the kit and plug one end into the gray Line port on the rear panel of the Gateway. Click Next. 15. Plug the other end of the black or gray DSL cable into the phone jack clos-...
  • Page 18 Chapter 2 Setting Up the Gateway 16. Make sure the DSL light on the Gateway glows solid green (this may take up to 30 seconds). Click Next. ☞ Note: If the light continues to blink, make sure the certified the service has been activated.
  • Page 19 Actiontec USB/Ethernet DSL Gateway User Manual 2. Read the instructions, select Initial Setup by clicking on the appropriate check box, then click Next. 3. If USA was chosen in step 1, select the appropriate letter (this information should be provided to you by the ISP) from the options in the next window, then click Next.
  • Page 20 Chapter 2 Setting Up the Gateway 4. Click the check box next to USB, then click Next. 5. Make sure the items needed to connect the Gateway to the first computer are included in the kit, then click Next.
  • Page 21 Actiontec USB/Ethernet DSL Gateway User Manual 6. Get the Gateway from the kit, then click Next. 7. Get the Power cord and plug the smaller end into the black Power port on the rear panel of the Gateway, then click Next.
  • Page 22 Chapter 2 Setting Up the Gateway 8. Plug the larger end of the Power cord into a power outlet, then click Next. 9. Click the On/Off switch to its on position (as shown in the picture on- screen), then click Next.
  • Page 23 Actiontec USB/Ethernet DSL Gateway User Manual 10. Confirm the Power light on the front of the Gateway glows solid green, then click Next. 11. Get the blue USB cable from the kit and plug the square end into the blue...
  • Page 24 Chapter 2 Setting Up the Gateway 12. Plug the rectangular end of the blue USB cable into an USB port on the front or back of the computer. Click Next. 13. Make sure the USB light on the front of the Gateway glows solid green. Click Next.
  • Page 25 Actiontec USB/Ethernet DSL Gateway User Manual 14. Get the black or gray DSL cable from the kit and plug one end into the gray Line port on the rear panel of the Gateway. Click Next. 15. Plug the other end of the black or gray DSL cable into the phone jack clos-...

  • Page 26: Installing Phone Filters

    Chapter 2 Setting Up the Gateway 16. Make sure the on the Gateway glows solid green (this may take up DSL light to 30 seconds). Click Next. ☞ Note: If the light continues to blink, make sure the certified the service has been activated.
  • Page 27 Actiontec USB/Ethernet DSL Gateway User Manual 2. Read the on-screen information, then unplug all telephones and other devices from their respective phone jacks. Click Next. 3. Get the phone filters. Click Next. Caution: Do not unplug the black or gray cable from the phone jack near your computer.
  • Page 28 Chapter 2 Setting Up the Gateway 4. Plug a phone filter into every phone jack with a telephone or other device con- nected to it, then click Next. 5. Plug the ends of the phone lines disconnected in step 2 into the phone filters plugged into phone jacks.
  • Page 29 Actiontec USB/Ethernet DSL Gateway User Manual 6. Read the on-screen instructions, and make sure the Gateway is connected exactly as shown, depending on whether the Gateway is connected via Ethernet or USB. Ethernet connection setup: USB connection setup: Click Next.

  • Page 30: Setting Up The Dsl Connection

    Chapter 2 Setting Up the Gateway Setting Up the DSL Connection After connecting the Gateway and installing phone filters, the connection must be configured. To do this: 1. Enter the user name and password in the appropriate text boxes (or click the does not require this information.”), then click Next.
  • Page 31 Actiontec USB/Ethernet DSL Gateway User Manual 3. Select the type of Static IP address received from the ISP (Single or Block), then click Next. 4. In the next window, enter the Address, Subnet, Gateway, 1, and 2 information (if applicable) in the proper text boxes. This information is...
  • Page 32 Chapter 2 Setting Up the Gateway 5. The Installation Buddy checks the configuration of the Gateway. 6. When the configuration is complete, a series of congratulations windows appears. Read the on-screen information, then click through the next few win- dows to exit the Installation Buddy. The Gateway is successfully configured and ready for use.
  • Page 33 Actiontec USB/Ethernet DSL Gateway User Manual This page left intentionally blank.

  • Page 34: Performing A Basic Setup

    Performing a Basic Setup This chapter is a guide through a basic setup of the Gateway. The Basic Setup includes instructions on how to connect the Gateway to the and changing the adnim user name and password. To complete a basic setup, the user will need information provided by the .
  • Page 35 Actiontec USB/Ethernet DSL Gateway User Manual 3. Follow the instructions in the “Set Up/Configuration” screen, then click Begin Basic Setup. 4. In the next screen, follow the on-screen instructions, then click Next. 5. In the next screen, select the type of connection provided by the...
  • Page 36 Chapter 3 Performing a Basic Setup 6. Enter the User Name and Password provided by the in the “ ” screen. If not, leave it blank. Click Next. Broadband Connection - 7. Click Save and Restart in the “Save and Restart” screen. 8.

  • Page 37: Changing The Admin User Name And Password

    Actiontec USB/Ethernet DSL Gateway User Manual Changing the Admin User Name and Password To create or change the admin user name and password, controlling access to the Gateway’s Web Configuration screens, follow these instructions: 1. From the Setup/Configuration screen, select Admin Username/Password from the menu on the left side.

  • Page 38: Using Advanced Setup

    Using Advanced Setup This section contains information concerning setting up the advanced features of the Gateway, such as wireless settings, remote management, and Web site blocking. Accessing Advanced Setup To access the Advanced Setup configuration screens: 1. Open a Web browser. In the “Address” text box type: http://192.168.0.1 then press Enter on the keyboard.
  • Page 39 Actiontec USB/Ethernet DSL Gateway User Manual 4. In the next screen, read the recommendations. To perform an advanced setup on the Gateway, click Begin Advanced Setup. 5. The “Configuring the Advanced Settings” screen appears. To check all the set- tings, or if unsure of which settings to modify, select Next. To modify a spe- cific configuration, click on its name in the menu bar on the left.

  • Page 40: Wan Ip Address

    Chapter 4 Using Advanced Setup WAN IP Address Address in the “Advanced Configuration” screen generates the Selecting WAN IP “ Address” screen. Address allows manual set up of the IP address WAN IP WAN IP of the Gateway. There are five ways to do this: Transparent Bridging, Obtain an Address through , Obtain an Address Through...
  • Page 41 Actiontec USB/Ethernet DSL Gateway User Manual Transparent Bridging Select this option to use the Gateway as a transparent bridge. This option should only be used if the Gateway is being used as a Modem to connect computer to the Internet via a DSL connection. When the Gateway is being used as a trans- parent bridge, it does not provide any firewall security.
  • Page 42 Chapter 4 Using Advanced Setup PPP Auto Connect To have the Gateway automatically connect to the Internet whenever needed (when a Web browser is opened, for example), activate “PPP auto connect” by clicking in the appropriate check box. Encapsulation (PPPoA only) Select one of the encapsulation options, based on information received from the Obtain an IP Through DHCP Select this option if the...
  • Page 43 Actiontec USB/Ethernet DSL Gateway User Manual Specify a Static IP Address Select this option if the service is configured to use Bridged or RFC 1483 Address, Subnet Mask, and Default Routed using a Static Address. Enter the Gateway Address provided by the in the “Broadband Connection via Static...

  • Page 44: Lan Ip Address

    Chapter 4 Using Advanced Setup The Unnumbered Mode feature automatically configures the appropriate rout- ing for the Address block. The route will bypass , enabling the public -to- , as well as -to- to be routed WAN ☞ Note: The Address information should be obtained from the when purchasing a block of public static address.

  • Page 45: Dhcp Server

    Actiontec USB/Ethernet DSL Gateway User Manual The values in the Address” and “Device Netmask” text boxes are the “Device IP address and Subnet mask of the Gateway as seen on the network. These values can be modified for your network, but Actiontec recommends keeping the...

  • Page 46: Dhcp Server Configuration

    Beginning IP Address The “Beginning Address” is the address at which the server starts DHCP assigning addresses. Actiontec recommends keeping the factory default setting 192.168.0.2 Ending IP Address The “Ending Address” is the Address at which the Server stops DHCP assigning addresses.

  • Page 47: Services Blocking

    Actiontec USB/Ethernet DSL Gateway User Manual DNS Server 1 “DNS Server 1” is the primary DNS server provided by the ISP. If the ISP pro- vided DNS server information, enter it here. If not, leave the text box intact. DNS Server 2 “DNS Server 2”...

  • Page 48: Website Blocking

    Chapter 4 Using Advanced Setup Netmeeting If a computer on the network uses Netmeeting, enable Netmeeting, by clicking the circle next to “On” and entering the IP address of the computer. Click Next, then click Save and Restart to apply the settings. If Net meeting is not needed, click the circle next to “Off.”...

  • Page 49: Remote Management

    Selecting Remote Management in the “Advanced Configuration” screen gener- ates the “Remote Management” screen. Remote Management allows access to the Gateway through the Internet via another computer. Actiontec recommends leav- ing the Remote Management Off (the factory default setting). To access the Gateway from the Internet, activate Remote Management by selecting On and writing down the address of the Gateway (see “...

  • Page 50: Port Forwarding

    To use port forwarding, enter the port range in the “ Port Range” text boxes. (If more than ports are needed, Actiontec rec- ommends using Hosting. See “ Hosting,” below, for more information.) Choose the protocol type from the “Protocol” list box, then enter the address of the computer on the network to be used as a host.

  • Page 51: Dmz Hosting

    Internet. hosting symbolically places the host computer outside of the Gateway’s network. Access to the network resources while hosting is active is blocked. Actiontec recommends activating hosting only as long as necessary. Warning: The Host computer will be vulnerable to com- puter hackers on the Internet while in mode.

  • Page 52: Firewall

    Chapter 4 Using Advanced Setup Firewall Selecting Firewall in the “Advanced Configuration” screen generates the “ Firewall ” screen. Select the level of security needed for the network. See Security Level Appendix F for details concerning each level of security. Dynamic Routing Selecting Dynamic Routing in the “Advanced Configuration”...

  • Page 53: Nat (Network Address Translation)

    Actiontec USB/Ethernet DSL Gateway User Manual NAT (Network Address Translation) Selecting in the “Configuring the Advanced Settings” screen generates the “ ” screen. The Gateway’s basic firewall security is based on . Disabling allows the computers connected to the Gateway to be accessed by outside parties.

  • Page 54: Upnp (Universal Plug And Play)

    (such as Netmeeting) to operate more efficiently. If Netmeeting is not running properly, activate UPnP. ☞ Note: Activating UPnP presents a slight security risk. After finishing with the hardware or software using UPnP, Actiontec recommends deactivating UPnP.
  • Page 55 Actiontec USB/Ethernet DSL Gateway User Manual This page left intentionally blank.

  • Page 56: Checking The Gateway's Status

    Checking the Gateway’s Status The current state of the Gateway’s Internet and local network connections can be checked via the various status screens in the Gateway’s Web Configurator. Status To view the Gateway’s connection status, select Status in the Main Menu. The “Current Status”...
  • Page 57 Actiontec USB/Ethernet DSL Gateway User Manual MAC Address Displays the (Media Access Control) address of the Gateway. WAN - Connection Displays the state of the connection to the service (Connected or Disconnected). WAN - Mode Displays the type of connection used to communicate with the...
  • Page 58 Chapter 5 Checking the Gateway’s Status LAN - DHCP Server Displays the state of the Server (On or Off). DHCP Routing Table Selecting Routing Table generates the “Routing Table” screen. This screen displays on overview of the Gateway’s routes. WAN Status Status generates the “WAN Status”...
  • Page 59 Actiontec USB/Ethernet DSL Gateway User Manual LAN Status Status generates the “Lan Port Status” screen. This screen displays Selecting on overview of the Gateway’s (Local Area Network) port connections. Active User List Selecting Active User List generates the “Active User List” screen. This screen dis-...

  • Page 60: Using Utilities

    Using Utilities To access the Gateway’s Utilities, select Utilities from the “Main Menu” screen. The “Utilities” screen appears. From this screen, the Web activity log can be viewed, the settings changed, oE Passthrough can be configured and activated, the Gateway’s factory default settings restored, and the Gateway’s firmware upgraded.

  • Page 61: Dsl Settings

    Activity Log screen, click Refresh. DSL Settings Settings from the “Utilities” screen. To access the “ Settings” screen, select The Gateway’s , Mode, and QoS (Quality of Service) settings can be changed from here. Actiontec recommends not changing these values without con- sulting the...

  • Page 62: Pppoe Passthrough

    “Utilities” screen. The Gateway allows passthrough of up to channels. Set up 8 PVC channels in this screen. Actiontec recommends not changing these values without consulting the Restore Default Settings To restore the Gateway to its factory default settings, select Restore Default Settings from the “Utilities”...

  • Page 63: Upgrade Firmware

    Actiontec USB/Ethernet DSL Gateway User Manual Upgrade Firmware Selecting Upgrade Firmware in the “Utilities” screen generates the “Upgrade Firmware” screen. Actiontec periodically posts firmware upgrades to enhance the capabilities and boost the performance of the Gateway. Follow the on-screen instructions to upgrade the Gateway’s firmware.

  • Page 64: Setting Up A Network

    Setting Up a Network Other computers can be connected to the Gateway to form a network, which allows the computers to transfer files, communicate with each other, and share an Internet connection. The networked computers can be connected to the Gateway in two ways: via Ethernet or Ethernet 1.
  • Page 65 Actiontec USB/Ethernet DSL Gateway User Manual 2. Read the instructions, select Adding Computers by clicking in the appropriate check box, then click Next. 3. Select Ethernet, then click Next.
  • Page 66 Chapter 7 Setting Up a Network 4. When the next window appears, get the yellow Ethernet cable from the Quick Start Kit, then click Next. 5. Plug one end of the yellow Ethernet cable into one of the open yellow ports on the back of the Gateway, then click Next.
  • Page 67 Actiontec USB/Ethernet DSL Gateway User Manual 6. Plug the other end of the yellow Ethernet cable into an Ethernet port on the back of the computer, then click Next. ☞ Note: An Ethernet port looks similar to a phone port, but is slightly bigger.
  • Page 68 Chapter 7 Setting Up a Network 8. In the next window, the Installation Buddy checks the configuration of the Gateway. 9. A series of congratulations windows appears. Click through them to exit the Installation Buddy. The computer is connected to the Gateway via Ethernet. To connect more comput- ers to the Gateway via Ethernet, repeat this procedure.

  • Page 69: Usb

    Actiontec USB/Ethernet DSL Gateway User Manual ☞ Note: If the first computer connected to the Gateway is connect- ed via , no other computers can be connected in this man- ner. Connect additional computers via Ethernet (see page 1. Insert the Installation in the drive of the computer.
  • Page 70 Chapter 7 Setting Up a Network 3. Select USB, then click Next. 4. When the next window appears, get the blue USB cable from the Quick Start Kit, then click Next.
  • Page 71 Actiontec USB/Ethernet DSL Gateway User Manual 5. Plug one end of the blue USB cable into the blue USB port on the back of the Gateway, then click Next. 6. Plug the other end of the blue USB cable into a USB port on the front or...
  • Page 72 Chapter 7 Setting Up a Network 7. Make sure the USB light glows steadily green, then click Next. 8. In the next window, the Installation Buddy checks the configuration of the Gateway.
  • Page 73 Actiontec USB/Ethernet DSL Gateway User Manual 9. A series of congratulations windows appears. Click through them to exit the Installation Buddy. The computer is connected to the Gateway via...

  • Page 74: Troubleshooting

    Troubleshooting This chapter contains a list of problems that may be encountered while using the Gateway, and techniques to solve them. Note that these techniques may not be suc- cessful in all cases. Also included is a list of frequently asked questions. Troubleshooting Cannot Use the Internet Physical Connections...

  • Page 75: Frequently Asked Questions

    Actiontec USB/Ethernet DSL Gateway User Manual Connection to the Internet To verify the Gateway’s connection to the Internet, open a Web browser. In the “Address” text box, type and click Go. The Gateway’s Web 192.168.0.1 Configurator Main Menu appears. Select Status, and once the “Status” screen appears, verify that “Connected”...
  • Page 76 Chapter 8 Troubleshooting Will my Xbox work with the Gateway? Yes, the Gateway is compatible with the Xbox. You will need to set a static the Xbox in the Xbox live network settings, and forward ports (both 3074 (both ), and ) if you run into resolution errors.
  • Page 77 Actiontec USB/Ethernet DSL Gateway User Manual I used DHCP to configure my network. Do I need to restart my computer to refresh my IP address? No. Select the appropriate operating system, below, and follow the steps to refresh your address.
  • Page 78 Chapter 8 Troubleshooting Connections How many computers can be connected through the Gateway? The Gateway is capable of connections, but having no more than con- nections is recommended. As the number of connections increases, the available speed for each computer decreases. Security What is the default username for the Gateway? The default username for the router is admin (all lower case).
  • Page 79 Actiontec USB/Ethernet DSL Gateway User Manual This page left intentionally blank.

  • Page 80: A Reference

    Reference This appendix contains information about various topics, including accessing information about your Windows computer. Locating Computer Information The following procedure is valid for computers running Windows , Me, 98 SE NT 4.0 2000, 1. From the desktop, right-click on My Computer. 2.

  • Page 81: Locating Windows Operating System Files

    Actiontec USB/Ethernet DSL Gateway User Manual Locating Windows Operating System Files If the operating system files reside on the hard drive of the computer, follow the instructions below to locate them. If the files are not on the hard drive, they must be loaded from the installation disks.
  • Page 82 Appendix A Reference 4. Click the down arrow next to the “Look in” text box and select My Computer from the list that appears. Click Search Now. 6a. Windows Me: When the search is complete, note the directory path that appears most often in the “In Folder”...
  • Page 83 Actiontec USB/Ethernet DSL Gateway User Manual Windows XP 1. From the desktop, click Start. 2. Select Search, then For Files and Folders. 3. The “Search Results” window appears. In the panel at left titled “What do you want to search for?”, click All files and folders.

  • Page 84: B Setting Up Static Ip On The Computer

    Setting Up Static IP on the Computer To communicate with the Gateway from a computer on the network (to use the Web Configuration Utility, for example), the user may have to switch the IP address settings from -enabled to static , so that the computer and the DHCP Gateway are on the same network subnet.
  • Page 85 Actiontec USB/Ethernet DSL Gateway User Manual 3. Another menu appears. Select Control Panel. 4. When the “Control Panel” window appears, double-click Network.
  • Page 86 Appendix B Setting Up Static IP on the Computer 5. The “Network” window appears. In the “The following network components are installed” list box, locate and double-click TCP/IP 6. The “ Address. Properties” window appears. Select TCP/IP 7. In the Address tab, make sure the circle next to “Specify an Address”...

  • Page 87: Windows Me

    Actiontec USB/Ethernet DSL Gateway User Manual 9. Enter the following address in the “Subnet mask” text box: 255.255.255.0 Enter the periods in the address by pressing the space bar on the keyboard. 10. Click . The Properties window disappears. TCP/IP 11.
  • Page 88 Appendix B Setting Up Static IP on the Computer 3. Another menu appears. Select Control Panel. 4. When the “Control Panel” window appears, double-click Network.
  • Page 89 Actiontec USB/Ethernet DSL Gateway User Manual 5. The “Network” window appears. In the “The following network components are installed” list box, locate and double-click TCP/IP 6. The “ Address. Properties” window appears. Click TCP/IP 7. In the Address tab, make sure the circle next to “Specify an Address”...

  • Page 90: Windows 2000

    Appendix B Setting Up Static IP on the Computer 9. Enter the following address in the “Subnet mask” text box: 255.255.255.0 Enter the periods in the address by pressing the space bar on the keyboard. 10. Click . The Properties window disappears. TCP/IP 11.
  • Page 91 Actiontec USB/Ethernet DSL Gateway User Manual 3. Another menu appears. Select Control Panel. 4. When the “Control Panel” window appears, double-click Network and Dial- up Connections.
  • Page 92 Appendix B Setting Up Static IP on the Computer 5. In the “Network and Dial-up Connections” window, double-click Local Area Connection. A number may be displayed after the Local Area Connection. If more than one Local Area Connection is listed, locate the one that corre- sponds to the network card installed in the computer by finding the name of the network card in the Device Name column.
  • Page 93 Actiontec USB/Ethernet DSL Gateway User Manual 7. The “Local Area Connection Properties” window appears. Click General. 8. In the “Components checked are used by this connection” list box, double- click Internet Protocol ( TCP/IP 9. The “Internet Protocol ( ) Properties” window appears.

  • Page 94: Windows Xp

    Appendix B Setting Up Static IP on the Computer 12. Enter the following address in the “Subnet mask” text box: 255.255.255.0 Enter the periods in the address by pressing the space bar on the keyboard. 13. Click . The “Internet Protocol ( ) Properties”...
  • Page 95 Actiontec USB/Ethernet DSL Gateway User Manual 3. When the “Control Panel” window appears, double-click Network Connections. 4. In the “Network Connections” window, double-click Local Area Connection. A number may be displayed after the Local Area Connection. If more than one Local Area Connection is listed, locate the one that corresponds to the network card installed in your computer by finding the name of the network card in the Device Name column.
  • Page 96 Appendix B Setting Up Static IP on the Computer 5. The “Local Area Connection Properties” window appears. Select General. 6. In the “This connection uses the following items” list box, double-click Internet Protocol ( TCP/IP 7. The “Internet Protocol ( ) Properties”...
  • Page 97 Actiontec USB/Ethernet DSL Gateway User Manual 9. Enter the following address in the “ Address” text box: 192.168.0.2 Enter the periods in the address by pressing the space bar on the keyboard. 10. Enter the following address in the “Subnet mask” text box: 255.255.255.0...

  • Page 98: C Computer Security

    Unless access to the computer is controlled, someone on the Internet can access the information on the computer and steal, damage, or destroy that information. Actiontec recommends securing your computer from unwanted intrusion. Security is ultimately the end user’s responsibility. Please secure your computer, and don’t be a victim.

  • Page 99: Gateway Security

    Actiontec USB/Ethernet DSL Gateway User Manual Gateway Security If connecting to the through Point-to-Point Protocol ( ), be sure to pro- vide the Gateway an administrative password. If a password is not set, someone on the Internet can access the Gateway and change its configuration or steal your login name and password.

  • Page 100: Electronic Security

    Appendix C Computer Security Network Applications Network applications (such as software programs) that allow remote access to the computer also make the computer vulnerable to access from other people on the Internet. If using a network application that allows remote access, consider install- ing a firewall.
  • Page 101 Actiontec USB/Ethernet DSL Gateway User Manual This page left intentionally blank.

  • Page 102: D Specifications

    Specifications General Model Number /Ethernet Gateway) GT704 Standards IEEE 802.3 (10BaseT) IEEE 802.3u (100BaseTX) G.dmt G.lite t1.413 RFC 1483, 2364, 2516 Protocol LAN - CSMA WAN - , Static DHCP Full-rate Interface ADSL switched ports (4) 10/100 RJ-45 port Speed...

  • Page 103: Led Indicators

    Actiontec USB/Ethernet DSL Gateway User Manual LED Indicators Power, , Internet, Ethernet ( Environmental Power External, 12V DC Certifications Class B, Class C (part Mark Commercial, Operating Temperature 0 º C to 40 º C (32 º F to 104 º F) Storage Temperature -20 º...

  • Page 104: E Glossary

    Glossary Access Point A device that allows wireless clients to connect to one another. An access point can also act as a bridge between wireless clients and a “wired” network, such as an Ethernet network. Wireless clients can be moved anywhere within the cover- age area of the access point and remain connected to the network.
  • Page 105 Actiontec USB/Ethernet DSL Gateway User Manual Ethernet Network A standard wired networking configuration using cables and hubs. Firewall A method preventing users outside the network from accessing and/or damag- ing files or computers on the network. Gateway A central device that manages the data traffic of the network, as well as data traf- fic to and from the Internet.
  • Page 106 Appendix E Glossary PPPoE (Point-To-Point Protocol over Ethernet)/ PPPoA (Point-To-Point Protocol over ATM) Methods of secure data transmission. Router A central device that manages the data traffic of the network. Subnet Mask A set of four numbers configured like an address used to create address numbers used only within a particular network.
  • Page 107 Actiontec USB/Ethernet DSL Gateway User Manual This page left intentionally blank.

  • Page 108: F Firewall Security Level Services Table

    Firewall Security Level Services Table The following information is related to the Firewall options (High, Medium, and Low) section in the “Using Advanced Setup” chapter of this manual (see page 49). The types of services and their respective ports are listed in the two right-hand columns: the “In”...

  • Page 109: Medium Security Level

    Actiontec USB/Ethernet DSL Gateway User Manual Medium Security Level Service Port http telnet smtp pop3 nntp real audio/video 7070 icmp H.323 1720 T.120 1503 imap https secure imap secure pop3 Low Security Level Service Port http telnet smtp pop3 nntp...

  • Page 110: Basic Security Level

    Appendix F Firewall Security Basic Security Level NAT (Network Address Translation) only. Service Acronym Definitions http HyperText Transfer Protocol. This protocol delivers information over the Internet, and is used when a computer connects to a Web site via an Internet browser.
  • Page 111 Actiontec USB/Ethernet DSL Gateway User Manual real audio/video A protocol used to transfer Real Audio or Real Video files. icmp Internet Control Message Protocol. Allows error messages, text packages, and informational messages to be transferred over the Internet. H.323 A standard protocol for sending audio and video over the Internet.

  • Page 112: G Non-Windows System Setup

    ☞ Note: When installing any software, consult the user manual and help files supplied with the software for detailed information. Actiontec provides the following information as a guideline only. Classic To configure the Gateway, Open Transport or above must be loaded on the 2.5.2...
  • Page 113 Actiontec USB/Ethernet DSL Gateway User Manual 2. When the “ ” window appears, select Edit from menu bar, then select TCP/IP User Mode. 3. When the “User Mode” window appears, select Advanced, then click 4. In the “ ” window, select Ethernet from the “Connect via” drop-down TCP/IP list.
  • Page 114 Appendix G Non-Windows Setup OS X 1. From the Apple Menu, select System Preferences. 2. When the “System Preferences” window appears, click Network.
  • Page 115 Actiontec USB/Ethernet DSL Gateway User Manual 3. The Network window appears. Select Built-In Ethernet from the “Show” drop-down list. 4. Select TCP/IP and, from the “Configure” drop-down list, select Using DHCP 5. Click Apply Now and close the “System Preferences” application. The TCP/ settings are configured.

  • Page 116: H Installation Buddy Settings

    Installation Buddy Settings The following information relates to step of the Installation Buddy (see pages ). The letters correspond to the following settings: Default Mode - PPPoE Default VPI - 0 Default VCI - 35 Default Mode - PPPoA Default VPI - 0 Default VCI - 35 Default Mode - PPPoE Default VPI - 8...
  • Page 117 Actiontec USB/Ethernet DSL Gateway User Manual Default Mode - PPPoA Default VPI - 0 Default VCI - 32...

  • Page 118: Notices

    Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Actiontec Electronics, Inc., may void the user’s authority to operate the equipment. Declaration of conformity for products marked with the FCC logo – United States only.

  • Page 119: Miscellaneous Legal Notices

    Miscellaneous Legal Notices © 2004 Actiontec Electronics, Inc. Actiontec Installation Buddy, Connection 1-2-3, Solutions for the Digital Life, Actiontec Digital Gear, and the Actiontec logo are trademarks or registered trademarks of Actiontec Electronics, Inc. All other names are the property of their respective owners.

  • Page 120: Limited Warranty

    Software: Actiontec Electronics warrants to Customer that each software program licensed from it will perform in substantial conformance to its program specifica- tions, for a period of ninety (90) days from the date of purchase from Actiontec Electronics or its authorized reseller. Actiontec Electronics warrants the media con- taining software against failure during the warranty period.
  • Page 121 The repaired or replaced item will be shipped to Customer, at Actiontec Electronics’ expense, not later than thirty (30) days after Actiontec Electronics receives the defective product.
  • Page 122 This warranty gives you specific legal rights which may vary depending on local law. Dispute Resolution: The customer may contact the Director of Technical Support in the event the Customer is not satisfied with Actiontec Electronics’ response to the complaint. In the event that the Customer is still not satisfied with the response of the Director of Technical Support, the Customer is instructed to contact the Director of Marketing.
  • Page 123 Actiontec USB/Ethernet DSL Gateway User Manual Governing Law: This Limited Warranty shall be governed by the laws of the State of California, U.S.A., excluding its conflicts of laws and principles, and excluding the United Nations Convention on Contracts for the International Sale of Goods.

Table of Contents