Cleaning - Norelco QuadraAction 6890XL Manual

8.
3 Hold Trimmer as shown and move in downward strokes
with gentle pressure.
4 Close Trimmer by sliding Trimmer switch down.
5 Turn razor OFF.

CLEANING

Every Week:Razor Heads
The easiest and most hygienic way to clean the razor
heads is to rinse them every week with hot water.
Water from the tap should be on a hot setting
but BE CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
Regular cleaning guarantees better shaving results.
You may also quickly rinse your razor heads after each use.
1 Always turn razor OFF, unplug from outlet and remove
cord from razor before cleaning.
2 Press the Razor Head Release Button,flip open the Razor
Head Assembly.
3 Clean razor heads and hair chamber by running under
hot water.
4 Close the Razor Head A s s e m b ly and shake off excess water.
5 Open Razor Head Assembly again and leave open
to air dry.
6 You may also clean the hair chamber without water by
using the supplied brush.
DO NOT clean the razor heads with the brush.
CLEANING
Once A Month:Razor Heads
Do not mix up the cutters and heads as the shaving
performance may be adversely affected for several weeks
before optimal shaving performance is restored.
1 Turn razor OFF, remove the plug from the outlet and
cord from the razor.
2 Press the razor head release button and open the razor
head assembly.
3 Turn the wheel counterclockwise and remove the
retaining frame.
4 Remove and clean one set of heads at a time.
5 Separate the cutter from the head and rinse clean under
hot water.
9.