Installation Procedure; Disassembling The Main Bracket (A); Assembling The Base Plate (B) - Hitachi TT-251 User Manual

Installation Procedure

Disassembling the Main Bracket (A)

1
Firstly, disassemble the main bracket (A) into A-1 and A-2 as shown in the following illustration.
1. Unscrew the 3 round
low.
head screws.
Main bracket
hook

Assembling the Base Plate (B)

2
Fix the main bracket (A-1) onto the base plate (B).
Screws to use: M4x8 hexagon head screw (E) x 4
Tightening torque: 0.98 N•m (10 kgf•cm)
(E) x 4
Base plate (B)
A-1
TT-251
5
A-2
2. Slide and remove A-2
from the main bracket
hook.
Main bracket (A-1)