Settings; Access Codes - Nokia 5800 XpressMusic User Manual

Downloading software updates may involve the transmission of large amounts of
data through your service provider's network. Contact your service provider for
information about data transmission charges.
Make sure that the device battery has enough power, or connect the charger before
starting the update.
Tip: To check the software version in your device, select Menu > Settings
and Phone > Phone mgmt. > Device updates.

Settings

Your device normally has MMS, GPRS, streaming, and mobile internet settings
automatically configured in the device, based on your network service provider
information. You may have settings from your service providers already installed in
your device, or you may receive or request the settings from the network service
providers as a special message.

Access codes

If you forget any of the access codes, contact your service provider.
● Personal identification number (PIN) code — This code protects your SIM card
against unauthorized use. The PIN code (4 to 8 digits) is usually supplied with
the SIM card. After three consecutive incorrect PIN code entries, the code is
blocked, and you need the PUK code to unblock it.
● UPIN code — This code may be supplied with the USIM card. The USIM card is an
enhanced version of the SIM card and is supported by UMTS mobile phones.
● PIN2 code — This code (4 to 8 digits) is supplied with some SIM cards, and is
required to access some functions in your device.
● Lock code (also known as security code) — The lock code (5 digits) helps you to
protect your device against unauthorized use. The preset code is 12345. You can
create and change the code, and set the device to request the code. Keep the
new code secret and in a safe place separate from your device. If you forget the
code and your device is locked, your device will require service and additional
charges may apply. For more information, contact a Nokia Care point or your
device dealer.
26 © 2008 Nokia. All rights reserved.