Creating A Dragon User Profile; Using Speech Recognition - Philips SpeechExec Pro Dictate 10 User Manual

Note
• If this option is activated, the
conversion, encryption and other
delivery after download options are
disabled.
• When using this option, make sure
that the delivery option SR (speech
recognition) is also activated on the
Pocket Memo and in the dictation
recorder app on SpeechAir.

Creating a Dragon user profile

Create a new user profile
When creating a new Dragon profile and
using a Philips SpeechMike microphone,
select the SpeechMike as your audio
device in the Dragon setup window.
When creating a new Dragon profile and
using a Philips Pocket Memo recorder,
select Transcription source as your audio
device in the Dragon setup window.
Note
• We highly recommend using a USB
microphone dictation source. Only
this source can be used for recording
dictation files within SpeechExec.
• Use the same author name for your
Dragon user profile as you are using
for your SpeechExec profile. To select
a Dragon profile, go to Settings >
General settings > Dragon profiles
> User name and select the relevant
user profile from the drop-down list.
User manual
To create a new user profile:
1
Go to Settings > General settings >
Speech recognition > Dragon profiles.
2
In the section Speech recognition
settings, click Create new Dragon
profile....
X The New User Profile window
opens.
3
Click New... and then follow the on-
screen instructions.
Upgrade an existing profile
You can upgrade existing Dragon profiles
that you have created in older versions
of Dragon NaturallySpeaking. After the
upgrade, you can use these profiles with
Dragon in SpeechExec.
Note
• This feature is not available if the Use
Dragon roaming option is enabled.
To upgrade an existing profile:
1
Go to Settings > General settings >
Speech recognition > Dragon profiles.
2
Click Upgrade old profiles....
3
When you are asked to allow the
application to make changes to your
device, click Yes.
4
Follow the on-screen instructions to
upgrade your old profile.
25