Resetting The G966; Date & Time; Allowing Date And Time To Be Set Automatically; Setting Date - NEC G966 Basic User's Manual

6.14.2 Resetting the G966

1. Tap Apps
2. Tap Factory data reset if you want to erase all data from the phone.
3. Check the item to delete:
 Tap the checkbox before Also format and wipe SD card? if you want to delete all data on the
embedded memory.
4. Tap Reset phone.
5. Tap Erase everything.
Note: If you do the factory reset to the G966, the following items will be cleared:






The following will be kept:



HS must reboot after reset is done.
6.15 Date & time

6.15.1 Allowing date and time to be set automatically

1. Tap Apps
2. Tap Automatic date & time.
Note: Set date, Select time zone and Set time will not work if you tap Automatic date & time.

6.15.2 Setting date

1. Tap Apps
2. Tap Set date. Make sure to deselect Automatic date & time.
3. Enter month, day and year for the G966.
© NEC Nederland B.V. 2014
All right are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. All brand names and
product names in this document are trademarks or registered trademarks of their respective companies.
92|
> Settings > Backup & reset
All externally installed apps and data
All internal app data (including call log, contacts, etc.)
User settings
System cache
SD-card (if selected in UI)
DECT EEPROM
ARM production data
DECT Factory adjusted EEPROM settings.
Initial XML provisioning data, including DECT Registrations, and Protected
settings on SD-Card or in internal memory.
> Settings > Date & time.
> Settings > Date & time
DECT G966 Handset Basic User Guide