Initial Settings - Pioneer DEH-80PRS Operation Manual

Section
02 Operating this unit

Initial settings

1 Function display
! Shows the function status.
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. and hold until the initial set-
ting menu appears in the display.
3 Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
Language select (multi-language)
For your convenience, this unit equips multiple lan-
guage display. You can select the language best sui-
ted to your first language.
1 Press M.C. to select the language.
English—Français—Italiano—Español—
Deutsch—Nederlands—РУССКИЙ
Calendar (setting the date)
1 Press M.C. to select the segment of the calendar
display you wish to set.
Year—Day—Month
2 Turn M.C. to set the date.
Clock (setting the clock)
1 Press M.C. to select the segment of the clock dis-
play you wish to set.
Hour—Minute
2 Turn M.C. to adjust the clock.
EngineTime alert (elapsed time display setting)
This setting allows you to measure the length of time
that elapses from when the machine is turned on and
display the amount of elapsed time per set period.
Also, you will hear alarm.
1 Press M.C. to select your favorite setting.
OFF—15Minutes—30Minutes
FM step (FM tuning step)
34
En
1
Normally, the FM tuning step setting employed for
seek tuning is 50 kHz. The tuning step changes to
100 kHz automatically when the alternative frequen-
cies search or traffic announcement standby function
is in use. It may be preferable to set the tuning step to
50 kHz when the alternative frequencies search func-
tion is on.
1 Press M.C. to select the FM tuning step.
50kHz (50 kHz)—100kHz (100 kHz)
Auto PI (auto PI seek)
The unit can automatically search for a different sta-
tion with the same programming, even during preset
recall.
1 Press M.C. to turn Auto PI seek on or off.
Music browse (music browse)
When operating external storage devices (USB, SD),
you can select files from the list.
1 Press M.C. to select the setting.
OFF—USB memory1—USB memory2—SD card
Warning tone (warning tone setting)
If the front panel is not detached from the head unit
within four seconds of turning off the ignition, a warn-
ing tone sounds. You can turn off the warning tone.
1 Press M.C. to turn the warning tone on or off.
AUX1 (front AUX input setting)/AUX2 (rear RCA
input setting)
Activate this setting when using an auxiliary device
connected to this unit.
1 Press M.C. to turn auxiliary setting on or off.
Dimmer (dimmer setting)
To prevent the display from being too bright at night,
the display is automatically dimmed when the car's
headlights are turned on. You can turn the dimmer on
or off.
1 Press M.C. to turn dimmer on or off.
Contrast (display contrast setting)
1 Press M.C. to select the setting mode.
2 Turn M.C. to adjust the contrast level.
0 to 15 is displayed as the level is increased or de-
creased.
Digital ATT (digital attenuator)