Siemens SINUMERIK 808D Service Manual page 25

Hide thumbs Also See for SINUMERIK 808D:
Table of Contents

Advertisement

Note
To use the CNC lock function, further activation operations are required after the CNC lock option is activated. For more
information, see the instructions below.
Special cases of CNC lock function
● Case 1: A commissioning archive created after the CNC lock function is deactivated is imported after the PPU
replacement.
To activate the CNC lock function again, a new activation file (.clc) appropriate for the control system must be created by
the machine manufacturer or dealer and imported into the control system.
Proceed through the following steps to create the encrypted file for activating the CNC lock function:
Service Manual
01/2017
1.
Start Access MyMachine on your computer.
2.
Select the following menu command:
3.
Click this button in the displayed dialog box to proceed to the next step.
4.
Enter the data required in the dialog box, for example:
The software version 4.7 SP4 must be selected for the SINUMERIK
808D/SINUMERIK 808D ADVANCED control system.
Serial number of the new CF card, which can be found on the PPU HMI through the
following operations:
+
Serial number of the new hardware (PPU), which can be found on the PPU rating
plate
The OEM PIN must be limited to 8 to 32 English characters and contain a mixture of
upper and lower case letters, numbers, and special characters (spaces are not al-
lowed).
Lock date in accordance with the status of the CNC lock function (last lock date or
new lock date)
25

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents