Specifications - MASTOSO MT-58 User Manual

No Operation during

the heating being in
use
Error Codes occur E0

Error Codes occur E1

Error Codes occur E2

Error Codes occur E3

Error Codes occur E4

 Error Codes occur E5
 Error Codes occur E6
 Error Codes occur E7
If the above remedies/controls can not fix the problem,unplug the appliance immediately, contact
service center for inspection and repairing,note the error code and report it to service center ltd.To
avoid any danger and damage to the appliance,do not disassemble or repair it by yourself.
Mastoso Induction Cooker MT-58
Is the cookware empty or the
temperature too high?
Is the air intake/exhaust vent
clogged or dirt has accumulated
Is the cooker working over 2 hours
without any external instruction?
Without Cookware or Incompatible
cookware used
Low-Voltage
High-Voltage
Top plate Overheat
Top Plate Sensor Open Circuit
IGBT Overheat
Top Plate Sensor Short Circuit
Internal circuit error

SPECIFICATIONS :

English
Please check whether the
appliance is being misused.
Remove the stuff clogging
the air intake/exhaust vent.
Operate the appliance again
after cooling down.
Reset cooking modes or use
timer function
When showing error signal
E0, E3, E5, please check
whether the cookware is not
suitable,or switch on the
appliance again after it is
cooled down naturally.
When showing E1, E2, E4,
E6, E7, please contact
service center for checking
and repairing