Area Names - Crow serenity Technician's Handbook

Address Description
Stay Mode the exit and entry delays can be cancelled by
pressing the ENTER button following arming of Stay Mode. The
next time Stay Mode is armed, if the ENTER button is not
pressed, all programmed exit and entry delays will apply
3.9: Areas/Area Names
Address Description
Area Name
P93E
4: Keypads
4.0: Keypads/Settings
Address Description
Beeps Enabled
P94E
No keypad indications when armed
screen information on a keypad to be turned off when the panel
P95E
is in the Armed or Stay Armed state. The screen returns to the
normal state on disarming of the system.
Turn Off backlight when not touched
and LEDs will turn off within 90 seconds at disarm state or 10
P96E
seconds at arm state if the keypad was not touched.
4.1: Keypads/Area Assignment
Address Description
Keypad Assigned To Area
area. For example, if keypad is assigned to only area 1 it can
P97E
arm or disarm that area only.
4.2: Keypads/User Assignment
Address Description
User can operate at keypad
only operate at certain Keypads. This option controls whether a
code or access tag User can Arm/Disarm from certain keypads.
P1018E
This option does not restrict users from operating outputs from
a particular keypad (this is done at locations P82E & P83E)
4.3: Keypads/Output Assignment
Address Description
Keypad is linked to Output
Output or multiple Outputs. If a Keypad is not assigned to an
Output a User cannot turn that Output On or Off from the
P98E
Keypad. This feature is useful when using the access control
features of the panel, eg a User may be allowed to operate
more than one Output with their code but they will be limited
Enter Area name up to 16 characters
- ,
Enable beeps on keypad
-
This option assigns keypad to
-
Any user can be assigned to
-
A Keypad can be assigned to an
-
This option allows the
-
The screen's backlight
-
Default
Default
" Area #"
Default
Enable
Disable
Disable
Default
All Keypads
assigned to
area 1
Default
Disable
Default
Enable
45