Canon PIXMA MP760 Service Manual page 45

#8 CLEAR
(Data initialization mode
settings)
#9 ROM
(ROM management)
#10 CS SET
#11 DATE / TIME
SERVICE REPORT
TEST MODE
Caution:
If USER SW of #8 CLEAR is selected, communication management data of user data is not
deleted.
However, if TEL or SERVICE SW is selected, the communication management data of user data is
deleted.
If ALL of #8 CLEAR is performed, be sure to set #5 TYPE and turn the power OFF/ON with the
Power button (Software Power: OFF/ON). DO NOT turn the power OFF/ON by removing and
inserting the power code (Hardware Power: OFF/ON). In this case, data may not be written
correctly.
Memo:
The date/time settings at #11 DATE/TIME is equivalent to the settings at [FAX SETTINGS] –
[USER SETTINGS] – [DATE&TIME]. Neither has priority.
TEL
USER SW
SERVICE SW
NCU
SERVICE DATA
REPORT
COUNTER
ALL
MAIN:V0.20
040806 0000 FA00
USB :00.00
CPU :DD-01-01-QUAD
981111 0000 FFFF
1.DISPLAY
2.SETTING
1.SERVICE & SYSTEM
2.SERVICE DATA
3.SYSTEM DUNP
Figure 1-29 Service Data (4/4)
1 - 38
Dialling data initialization
User data and service data #1 to #3
initialization
User data and service data #1 to #3 and
#6 to #7 initialization
#4 NCU setting data initialization
Data on system dump list initialization
Data on activity report initialization
Total number of pages printed/scanned
All user data, service data, activity
management data, and image data
initialization (except COUNTER)
Version No. and Checksum display
Not used
Date and time display
Date and time setting