Troubleshooting; Specifications; Fast Moving Parts - Texas Equipment Vision 700 NC Assembly And Use Instructions

Troubleshooting

The engine won't start:
The engine is not running
smoothly:
If the blades are not
rotating:
The blades continue turning
once free of the ground:

Specifications

Model
Engine
Length (mm)
Width (mm)
Height (mm)
Working width (mm)
Weight (kg)
Working width with intermediate
blades (mm)
Handlebar
Forward gear
Reverse gear
Working depth (mm)

Fast moving parts

Products with the brand name 'Texas' are covered by a 2-year warranty against
manufacturing defects. The warranty does not cover fast moving parts such as:
Belts
Cables
Pulleys
Grips
Fast moving parts are covered by a 1-year warranty. Spare parts and replacement
costs for the above are not covered by the warranty.
1. Check that the start/stop button is correctly set.
2. Check that the spark plug is not defective.
3. Check that the spark plug socket is fitted correctly.
4. If there is a fuel valve, check that this is open.
5. Check that the choke is open.
6. Check the engine manual for further troubleshooting
advice.
1. Check that the choke has been released.
2. Check that the petrol has not been contaminated.
1. Check that there are no stones caught in the
blades.Remove any stones by detaching the blades.
2. Check that the throttle cable has not become detached.
3. Check that the throttle cable can activate the engine
when fully open.
4. Check whether the V-belt is defective.
5. Make sure that the belt coupling is adjusted correctly.
1. Stop the engine, contact your dealer.
Vision 700 TG
PowerLine
TG650B
1300
630
990
690
68
970
Adjustable
2
1
380
Spark plugs
Gaskets
Diaphrams
13
Vision 700 R Vision 700 B
Robin SP170 B&S Vanguard
1300
630
990
690
68
970
Adjustable
2
1
380
1300
630
990
690
68
970
Adjustable
2
1
380