Using An Accessory Rf Modulator; Connecting The Power Cord - Philips DVP762/05 User Manual

Dvd video player
Hide thumbs Also See for DVP762/05:
Table of Contents

Advertisement

RF coaxial cable to TV
2
Back of RF Modulator
INT IN
TO TV
VIDEO
IN
Antenna or
Cable TV signal
CVBS
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
COAXIAL OPTICAL
S-VIDEO
IMPORTANT!
– If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.

Using an accessory RF modulator

1
Use the composite video cable (yellow) to
connect the DVD Player's CVBS jack to
the video input jack on the RF modulator.
2
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV's
RF jack.
(example only)
AUDIO IN
R
L
CH3 CH4
1
Y
Pr
Pb
TV OUT

Connecting the power cord

S-VIDEO
AUDIO
OUT
VIDEO IN
L
R
STER
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
G
If a disc is loaded, press STANDBY ON
on the DVD Player front panel,
"DISC" appears on the display panel.
G
If a memory card is inserted, press
STANDBY ON on the DVD Player
front panel,
"SLOT1" or "SLOT2" appears on the
display panel.
G
If there is neither a disc nor memory card
inserted,
"NO DISC" appears on the DVD
Player display panel.
Connections
COMPONENT
VIDEO IN
IN
V (Pr/Cr)
~ AC MAINS
U (Pb/Cb)
Y
CVBS
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
COAXIAL OPTICAL
S-VIDEO
Y
Pr
Pb
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sl-0433/05-1

Table of Contents