Using An Accessory Rf Modulator; Connecting The Power Cord - Philips dvp7400 User Manual

Connections
RF coaxial cable to TV
Back of RF Modulator
INT IN TO TV VIDEO
IN
ODE
Pr Pb Y
PCM /
DTS / MPEG
INTERLACE COMPONENT
PROGRESSIVE
COAXIAL
VIDEO S-VIDEO
DIGITAL OUT
VIDEO OUT
IMPORTANT!
– If your television only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.

Using an accessory RF modulator

A
Use the composite video cable (yellow)
to connect the DVD player's CVBS jack
to the video input jack on the RF
modulator.
B
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your
television's RF jack.
C
To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) sockets of the DVD player to the
corresponding AUDIO IN sockets on the
RF modulator (cable supplied).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
12
01-49 dvp7400_93_eng2.indd 12 01-49 dvp7400_93_eng2.indd 12
(continued)
(example only)
AUDIO IN
R L
CH3 CH4
CENTER
DIGITAL/
L L L
R R R
MAIN SUB WOOFER SURROUND
OPTICAL MIXED 2CH
6CH DISCRETE
AUDIO OUT

Connecting the power cord

CENTER
L
~ AC
MAINS
R
SUB WOOFER
MAIN SURROUND
6CH DISCRETE
AUDIO OUT
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD player
front panel.
2006-10-12 2:16:55 PM 2006-10-12 2:16:55 PM