Message List - Yamaha CLP-340 Service Manual

■

MESSAGE LIST

Message
Displayed after factory presets are recalled.
CLr
Do not turn off the power of the instrument when "
delete all song data in the instrument, including external songs.
Displayed when Musicsoft Downloader is started on a computer connected to the instrument.
con
When this message appears, you cannot operate the instrument.
E01
Indicates failure in accessing the USB storage device because the device or media is damaged.
E02
Displayed when the song data is damaged or not recognized.
E04
Indicates that the song data is too large to be loaded.
End
Displayed when the current operation is completed.
Displayed when the MIDI/USB cable is disconnected while starting Musicsoft Downloader on a
Err
computer connected to the instrument.
Indicates that internal memory has been cleaned up. Recorded songs and external songs which
have been loaded from a computer are cleared, because the power has been turned off before
the song save or load operations were completed.
FCL
Do not turn off the power of the instrument when "
cause the instrument to malfunction.
For
Indicates that the instrument has engaged format mode for the USB storage device.
Displayed when internal memory becomes full during song recording.
FUL
Displayed when the USB storage device becomes full and the song cannot be saved.
Displayed when the total amount of fi les has become too large.
Lod
Displayed when a protected song is loading.
n1Y
Confi rms whether each operation is executed or not.
n~Y
Reconfi rms whether the overwriting, delete or format operation is executed or not.
Pro
Indicates that the USB storage device or media is protected.
CAUTION
CAUTION
CLP-340/CLP-340M/CLP-340C
Comment
CLr
" appears in the display. Doing so may
FCL
" appears in the display. Doing so may
77