Non-Volatile Memory - Haier Yr-E17 Operation & Installation Manual

Operation
2) Under heating mode 16°C (60°F), keep pressing key
for 5 seconds to set energy saving parameter in heating mode.
This heating energy saving parameter is flashing behind top-
right colon. The default value is 26°C (78°F). This highest
target heating temperature can be adjusted by . After
setting, press key to confirm and exit.
3) Energy saving parameter will be valid after energy saving
icon displays.

Non-volatile Memory

(1) Set valid or invalid non- volatile memory through dip switch
Sw4.
(2) Info memorized: Mode, Fan Speed, Temp. Setting, Swing
State, Heat Reclaim Ventilation function.
(3) If timer or sleeping is set, it will be in OFF state after
electrified again; it will memorize all the state before power
failure except ON/OFF state.
(4) For easy maintenance, no matter non-volatile memory is
valid or invalid, malfunction record will be remembered.
43