Read your User’s Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.philips.com/support 8239 300 34341 01-39 DVP5100K_78 25/01/2005, 3:29 PM...
LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO. AVISO IMPORTANTE Philips Mexicana, S.A. de C.V. no se hace responsable por daños o desperfectos causados por: – Maltrato, descuido o mal uso, presencia de insectos o roedores (cucarachas, ratones etc.).
Page 3
DVD system may require a playability enhancement or upgrade. As DVD technology advances, these enhancements will become common and will be easy to complete. Go to www.philips.com/support for software upgrade. 01-39 DVP5100K_78 ‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS...
Due to the numerous versions of new CD-Audio copy protection or enhanced CD-Audio protection recently available on certain discs, Philips is unable to guarantee that this DVD Player is fully compatible with such new discs. Should you have difficulty playing any such CD-Audio discs, kindly refer them to your CD- Audio disc retailer.
Page 5
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Contents Introduction Supplied accessories ... 8 Care and safety information ... 8 Connections Connecting TV ... 9-10 Using Composite Video jacks (CVBS) ... Using Component Video jacks (Pr Pb Y) ... Using an accessory RF modulator ... Connecting the power cord ... 10 Optional : Connecting to an Audio System .
Page 7
DVD Menu Options General Setup menu ... 26-27 Locking/Unlocking the disc for viewing ... Dimming system’s display screen ... Programming disc tracks ... OSD Language ... Screen Saver - turning on/off ... Sleep ... DivX VOD registration code ... Audio Setup Menu ... 28-29 Analogue output ...
01-39 DVP5100K_78 Do not block the vents – Do not operate the DVD Player in an enclosed cabinet, allow about 10 cm (4 inch) of free space all around the player for adequate ventilation.
(or labeled as A/V In, Video In, Composite or Baseband) on the TV (cable supplied). To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/...
RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. Using an accessory RF modulator Use the composite video cable (yellow) to connect the DVD Player’s CVBS jack to...
Connect the COAXIAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied). Set the DVD Player’s Digital Output to PCM-ONLY or ALL depending on the capabilities of your Receiver (see page 28 “Digital Output”).
Functional Overview Front and Rear Panels STANDBY-ON B – To switch the DVD Player to Standby mode or ON Disc slot – Insert disc here EJECT / – To eject the disc Display – Shows the current status of the DVD...
Helpful Hint: Press “STOP” for few seconds to eject the disc. 01-39 DVP5100K_78 Functional Overview POWER B – To switch the DVD player to standby mode or ON 0-9 numerical key pad – Selects numbered items in a menu DISPLAY –...
9-10 “Connecting TV”). Turn on the TV and set to the correct video-in channel. You should see the Philips DVD background screen on the Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details.
1) Your TV can accept progressive signals, a progressive scan TV is required. 2) You have connected the DVD player to your TV using Y Pb Pr (see page 9.) Turn on your TV. Turn off your TV progressive scan mode or turn on interlaced mode (refer to your TV user manual.)
This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match. Press SYSTEM MENU. Press 2 repeatedly to select {VIDEO SETUP PAGE}.
Step 3: Setting language preference You can select your preferred language settings. This DVD Player will automatically switch to the language for you whenever you load a disc. Setting the OSD Language The On-screen language for the system menu will remain as you set it, regardless of various disc languages.
Video In channel. (See page 14 “Setting up the TV”). Press STANDBY-ON on the DVD Player front panel. You should see the Philips DVD background screen on the TV. Insert a disc in the disc slot. Make sure the label side is facing up.
Basic playback controls Unless otherwise stated, all operations described are based on Remote Control use. Pausing playback During playback, press PAUSEÅ. Playback will pause and sound will be muted. To resume normal playback, press PLAY B. Selecting track/chapter Press S / T or use the numeric keypad (0-9) to key in a track/chapter number.
Disc Operations Operations for video playback (DVD/VCD/SVCD) Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load in the disc. To select a playback feature or item Use 1 2 3 4 keys or numeric keypad (0-9) on the remote, then press OK to start playback.
Special DVD Features Playing a Title Press DISC MENU. The disc title menu appears on the TV screen. Use 3 4 1 2 keys or numeric keypad (0-9) to select a play option. Press OK key to confirm. Camera Angle Press ANGLE repeatedly to select different desired angle.
TIPS: to the instructions supplied with the discs. 01-39 DVP5100K_78 Playing a DivX disc This DVD player supports the DivX movie playback that you download from your computer onto a CD-R/RW (see page 26 for more information). Load a DivX disc.
Playing MP3/WMA/MPEG-4/ JPEG/Kodak Picture CD IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 14 “Setting up the TV”). General Operation Load a disc. The disc reading time may exceed 30 seconds due to the complexity of the directory/file configuration.
Disc Operations Special picture disc features IMPORTANT! You have to turn on your TV and set to the correct Video In channel. (See page 14 “Setting the TV”). Load a Picture disc (Kodak Picture CD, JPEG). For Kodak disc, the slide show will begin.
Video In channel. (See page 14 “Setting up the TV”). General Operation Connect a microphone (not supplied) to MIC on the front panel of the DVD player. Press KARAOKE repeatedly. ‘MIC ON/OFF’ appears on the TV screen. Load a karaoke disc and press PLAY...
DVD Setup Menu Options This DVD Player setup is carried out via the TV, enabling you to customise the DVD Player to suit your particular requirements. General Setup menu In disc mode, press SYSTEM MENU. Press 1 2 to select ‘General Setup’ icon.
Turn off the sleep function. Press 3 4 to select a setting, then press OK to confirm your selection. DivX(R) VOD registration code Philips provide you the DivX (Video On Demand) registration code that allows you to rent and purchase videos using the DivX ®...
If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid. LPCM Output If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’.
Sound Mode The options included in Sound Mode Setup are: ‘3D’, ‘Movie Mode’ and ‘Music Mode’. In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {SOUND MODE}, then press 2. Press the 3 4 keys to highlight an option. Enter its submenu by pressing 2. Press 3 4 to select a setting, then press OK to confirm your selection.
DVD Setup Menu Options Night Mode - turning on/off In this mode, the high volume outputs are softened and low volume outputs are brought upward to an audible level. It is useful for watching your favourite action movie without disturbing others at night. In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {NIGHT MODE}, then press 2.
Setting the TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. The format you select must be available on the disc. If it is not, the setting for TV display will not affect the picture during playback.
DVD Setup Menu Options Picture Setting This DVD Player provides three predefined sets of picture colour settings and one personal setting which you can define yourself. In ‘VIDEO SETUP PAGE’, press 3 4 to highlight {PICTURE SETTING}, then press STANDARD Select this for standard picture setting.
Preference Page Press Ç twice to stop playback (if any), then press SYSTEM MENU. Press 1 2 to select the ‘Preference Setup’ icon. Press OK to confirm. Audio, Subtitle, Disc Menu These menus contain various language options for audio, subtitle and disc menu which may be recorded on the DVD.
DVD Setup Menu Options Press 3 4 to highlight a rating level for the disc inserted and press OK. To disable Parental controls and have all Discs play, select {8 ADULT}. Use the numeric keypad (0-9) to enter the six-digit password (see page 35 “Changing the password”).
In ‘PREFERENCE PAGE’, press 3 4 to highlight {DivX SUBTITLE}, then press 2. STANDARD A standard list of English subtitle fonts provided by this DVD Player. CYRILLIC Select this to display a cyrillic subtitle fonts. Press 3 4 to select a setting, then press OK to confirm your selection.
Completely distorted picture or black/white picture with DVD No sound or distorted sound No audio at digital output Visit us at www.philips.com/support for service support 01-39 DVP5100K_78 Solution – Check if the AC power cord is properly connected. – Press the STANDBY ON on the front of the DVD system to turn on the power.
Page 37
Unable to select Progressive Scan on/off – Check that the output of the video signal is switch to No sound during DivX movies playback An MPEG-4 or DivX movies does not repeat Visit us at www.philips.com/support for service support 01-39 DVP5100K_78 Troubleshooting Solution –...
Specifications TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines Playback Multistandard (PAL/NTSC) VIDEO PERFORMANCE Video DAC 12 bit, 108mHz YPbPr 0.7 Vpp — 75 ohm Video Output 1Vpp — 75 ohm VIDEO FORMAT Digital Compression MPEG 2 for DVD,SVCD MPEG 1 for VCD MPEG-4 DivX 50Hz...
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs.