Night Mode
This mode optimizes playback of sound at
low volume. High volume outputs will be
softened and low volume outputs are
brought upward to an audible level.
A
In 'Audio', press
Mode }, then press
{ Off }
Turns off night mode feature. Select this
to enjoy the surround sound with its full
dynamic range.
{ On }
Select this to set low volume output. This
feature is only available for movie discs
with Dolby Digital mode.
B
Use
to select a setting and press
OK to confi rm.
Down Sampling
You can enable and disable the digital
signal for better sound output quality.
A
In 'Audio', press
Sampling }, then press
{ Off }
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
{ On }
Playback a disc recorded at the sampling
rate of 48kHz.
B
Use
to select a setting and press
OK to confi rm.
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press SETUP to exit the menu item.
dvp3136_94_eng 4.indd 35
dvp3136_94_eng 4.indd 35
DVD Menu Options
A
to select { Night
.
B
to select { Down
.
Audio Output
You can set the audio output of the DVD
Player.
In 'Audio', press
to select { Audio
Output }, then press
.
{ Multi channel }
All channels could output audio.
{ Stereo }
Only left channel and right channel could
output audio.
Use
to select a setting and press
OK to confi rm.
Tip:
– During Multi Channel mode you may not
be able to hear the complete spectrum of
music/dialogue through the amplifi er output
with some Multi Channel discs.
(continued)
35
2007-06-05 9:58:31 AM
2007-06-05 9:58:31 AM