Answering A Private Call - Motorola MTS 2000 Operation Manual

5. If the party you are calling answers,
carry on with your conversation in
the normal radio manner: press the
PTT Switch to talk; release the PTT
Switch to listen.
6. When you have finished your con-
versation, or if the number you are
calling does not answer or is not in
service, press the HOME key to
send the hang-up code.

Answering a Private Call

You Do
If you press the PTT Switch before
you select "CALL" from the menu,
the response will be transmitted
to everyone in your Talkgroup, but
the person calling you will NOT be
able to hear you.
1. To answer the call privately, press
the right arrow key [>] until
"CALL" appears in the display.
After viewing the caller's ID num-
ber, you can decide to either talk
privately [go to step 2], or not
answer the call by letting the re-
mainder of the 20 seconds elapse
and returning to the current
Talkgroup.
Section II
46
The radio will return to the current
Talkgroup
When your radio receives a Private
Call, you will hear two alert tones
[repeating every 5 seconds for 20 sec-
onds], and the display will alternate
between "CALL RECEIVED" and the
current Talkgroup. The green LED and
call received status annunciator will
flash to indicate that a call is being
received. You will have 15-20 seconds
to answer the call before the radio
automatically returns to the current
Talkgroup.
The display shows 3 choices: for
example, "CALL," "PAGE," and
"PHON."
The display will show the incoming
caller's ID number, and the call re-
ceived annunciator will turn off. The
caller's ID number will remain on the
display for the duration of the call.
Snohomish County PUD Radio Operations Manual • Rev. 6/03
The Radio Does