Step 3: Setting Up Progressive Scan Feature - Philips DVP3040 User Manual

Getting Started
Step 3 : Setting up
Progressive Scan feature
(for Progressive Scan TV only)
The progressive scan displays twice the
number of frames per seconds than
interlaced scanning (ordinary normal TV
system). With nearly double the number
of lines, progressive scan offers higher
picture resolution and quality.
Before you start...
– Ensure that you have connected this
DVD player to a progressive scan TV
using the Y Pb Pr connection (see page
12).
– Ensure that you have completed the
basic installation and set-up.
A
Turn on your TV and set to interlace
mode (refer to your TV user manual).
B
Press POWER on the remote control
to turn on the DVD player.
C
Select the correct video-in channel.
The DVD background menu appears.
D
Press SETUP.
E
Press to select { Video }, then
press .
Language Language Language
Aspect Ratio Aspect Ratio Aspect Ratio
View Mode View Mode
View Mode
Video Video Video
TV System TV System TV System
Video Out Video Out Video Out
Audio Audio Audio Smart Picture Smart Picture
Smart Picture
Rating Rating Rating
Misc Misc Misc
F
Press to select { Video Out },
then press .
G
Select { P-Scan }, then press OK to
confi rm.
The menu will appear on the TV.
TIPS: The underlined option is the factory default setting.
Press to go back to previous menu item. Press SETUP to exit the menu item.
18
01-43_dvp3040_37_eng2.indd 18 01-43_dvp3040_37_eng2.indd 18
(continued)
H
Press
OK to confi rm.
I
Turn on your TV progressive scan mode
(refer to your TV user manual).
J
Press
OK to confi rm.
To deactivate Progressive Scan
manually:
Wait for 15 seconds for the auto
recovery.
OR
Press OPEN/CLOSE ç on the DVD
A
player to open the disc tray.
B
Press numeric keypad '1' on the
remote control for few seconds.
: : : 4:3 4:3 4:3
: : Auto Fit Auto Fit
: Auto Fit
Tip:
: : : NTSC NTSC NTSC
– There are some progressive scan TVs and
: : Component Component Component
: : P-Scan Personal Personal High-Defi nition TVs that are not fully
compatible with this unit, resulting in the
unnatural picture when playing back a DVD
VIDEO disc in the progressive scan mode. In
such a case, turn off the progressive scan
feature on both the DVD player and your TV.
Activating Progressive Scan
1.Ensure your TV system supports
Progressive Mode
2.If there is a distorted picture on
the TV, wait 15 seconds for
automatic recover
NO
Yes
to highlight { Yes } and press
The menu will appear on the TV.
Confirm again to use new setting
Revert to original setting in 14 seconds
Yes NO
to highlight { Yes } and press
The setup is now completed and you
can start enjoy the high quality
picture.
The DVD background screen appears.
2006-07-14 3:35:28 PM 2006-07-14 3:35:28 PM