3. Disconnect WLAN antenna (C) connected to WLAN card and remove the WLAN
antenna from the cable guides (D)
4. Disconnect the thermal cables (E) from the mainboard connectors
5. Loosen five (5) captive screws (A) in numerical order from one (1) to five (5)
(Figure
3-16).
Figure 3-16. Thermal Module (Discrete) Screws
6. Loosen two (2) captive screws (B)
7. Remove one (1) screw (C) securing the thermal module in place
8. Remove thermal module from the mainboard
Figure 3-17. Thermal Module (Discrete) Removal
3-22
(Figure
B
3
(Figure
3-15).
5
A
1
A
2
3-16).
(Figure
3-17).
Machine Maintenance Procedures
(Figure
3-15).
B
C
4
(Figure
3-16).