To Deactivate Progressive Manually; Selecting The Colour System That Corresponds To Your Tv - Philips DVP3005/78 User Manual

Getting Started

To deactivate Progressive manually

G
When the distorted picture still
appears on the TV, it may be due to
the connected TV does not accept
progressive signals, and progressive is set
by mistake. You must reset the unit to
interlace format.
1
Turn off your TV progressive scan mode
or turn on to interlaced mode (refer to
your TV user manual.)
2
Press OPEN/CLOSE on the DVD player
to open the disc tray.
3
Press numeric keypad '1' on the
remote control for few seconds.
➜
The DVD blue background screen
will appear on the TV.
Selecting the colour system that
corresponds to your TV
This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.
1
Press SYSTEM MENU.
2
Press 2 repeatedly to select {VIDEO
SETUP PAGE}.
3
Press 3 4 to highlight {TV TYPE}, then
press 2.
To return to the previous menu, press 1.
TIPS:
To remove the menu, press
16
01-33 DVP3005_LA2a
4
Press 3 4 to highlight one of the options
below:
PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.
NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.
Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.
5
Select an item and press OK.
Helpful Hints:
– Before changing the current TV
Standard setting, ensure that your TV
supports the 'selected TV Type' system.
– If there is no proper picture on
your TV, wait for 15 seconds for auto
recovery.
SYSTEM MENU
16
.
3139 246 15561
11/05/05, 3:09 PM