Analog Output - Philips DVDR75 Owner's Manual

62 Analog Output

If you connected the Recorder's white/red OUT AUDIO L/R jacks to a
Stereo or TV as shown on pages 12-15, choose a setting for Analog Output.
You do not need to adjust this setting if you used the Recorder's Coaxial
DIGITAL AUDIO OUT jack.
Check your Stereo or TV and see if it is compatible with Dolby Surround.
Then follow the steps below to choose the Analog Output setting that is
most compatible with your Stereo or TV.
1
Press SYSTEM MENU. Press ; to select
corner of the menu bar at the top of the TV screen.
2
Press CH-9 repeatedly to select
3
Press CH-9 to select Analog output, then press :.
4
Press CH+8 or CH-9 to select Stereo or Surround, then
press OK.
Select Stereo to hear sound from the left and right audio channels
if the DVD Recorder is connected to a Stereo TV.
Select Surround if your audio equipment is compatible with Dolby
Surround. If it is, usually a Dolby Pro Logic logo will appear on the
equipment.
W X Y
~
1 2 1en
Digital output
G
Analog output
Night mode
r
5
Press SYSTEM MENU to remove the menus.
G
, then press :.
Z a
off no off
Sound
s Stereo
L
Surround
in the top left
STANDBY
MONITOR
TV / DVD T / C PLAY MODE REC. MODE
1
2 3
4 5 6
8
7 9
0
DISC
SYSTEM
MENU
OK
SELECT
1-4
CH
CH
TIMER
FSS TV VOLUME
RETURN CLEAR
PLAY
STOP
I I
AUDIO PAUSE
REC/OTR
Helpful Hint
• You also can set analog sound
in the Menu Bar. See page 37.
1,5