Recording
Taking Pictures While Adjusting a Setting
Automatically
Recording mode:
You can take multiple pictures while automatically adjusting a setting by pressing
the shutter button.
1
Set the menu (→26)
→
(Exposure Bracket)
(White Balance Bracket)
2
Press
[MENU/SET]
• If [
] is set, rotate the rear dial to set the adjustment range.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture
■
To cancel [Bracket]
Select [OFF] in step
Exposure Bracket
■
About [More settings] (step
[Step]
[Sequence]
[Single Shot Setting]
Not available for burst recording.
36
DVQX1136 (ENG)
(Bracket Recording)
[Rec] → [Bracket] → [Bracket Type]
to select [More settings] and then press
1
.
Sets the number of pictures to be taken and the exposure
compensation range.
Sets the order in which pictures are taken.
[
]: Takes one picture each time you press the shutter button.
[
]: Takes all the pictures set to be taken when you press the
shutter button once.
Press the shutter button to perform recording while
adjusting the exposure.
Press the shutter button once to take three pictures with
different white balance settings automatically.
2
above)