Table of Contents
Advertisement
Apply NX Bass effect
NX Bass effect adds clean and lively
characteristics to your music with rather low
background noise.
•
During play, press NX Bass. Then the
sound will change in 3 stages:
•
Stage 1: The sound volume increases to
a higher level and stays at this level for
5 seconds.
» [FIRING] (firing) is displayed.
•
Stage 2: The sound volume gradually
decreases to its original level in 10
seconds.
» [DISCHARGE] (discharge) is displayed.
•
Stage 3: The sound volume keeps at
normal level for 40 seconds.
•
If you press NX Bass again,
[RECHARGE] (recharge) is displayed.
Adjust equalizer settings
Custom Equalizer lets you increase or decrease
the gain for specific frequency ranges, and adjust
audio output to your own preferences.
1
Press CUSTOM on the main unit.
2
Switch the Custom Equalizer knobs to
adjust the equalizer settings for each of the
three frequency ranges.
EN
17
Advertisement
Table of Contents
