One for All URC-9966 User Manual page 45

OFA Kameleon wRF UG rev 3 Fr-En.fm Page 45 Friday, May 6, 2005 8:03 PM
PROBLEM: Favorite channel function does not work properly.
SOLUTION: Some devices (e.g.,Cable Boxes or Satellite Receivers) use
two-digit channel numbers. During programming, press
ENTER or OK once after entering a channel number (e.g., 0 2
ENTER for channel 2). See "Programming Favorite Channel
Scan" on page 39.
PROBLEM: Changing channels does not work properly.
SOLUTION: If the original remote control required pressing ENTER to
change channels, then press ENTER on the remote control
after entering channel numbers.
PROBLEM: No remote control of volume.
SOLUTION: See "Changing Volume Lock" on page 27 to lock/unlock
volume.
PROBLEM: Two bottom IR segments flash when a key is pressed, but
home entertainment device does not respond.
SOLUTION: Make sure the remote control is aimed at your home
entertainment device and is not farther than 15 feet away.
PROBLEM: CH and CH do not work for your RCA TV.
SOLUTION: Due to RCA design (1983-1987), only the original remote
control will operate these functions.
PROBLEM: Pressing SCROLL one or times in CD, DVD, PVR or Home
Theater mode, does not display a secondary menu screen.
Even though SCROLL is displayed, for these modes, there are
SOLUTION:
no additional menu screens.
PROBLEM: Cannot program my combo device code.
SOLUTION: Make sure have selected the correct device key for your
combo code.
Troubleshooting
U ' G
SER S UIDE
45