Checking The Codes - One for All URC-9966 User Manual

OFA Kameleon wRF UG rev 3 Fr-En.fm Page 20 Friday, May 6, 2005 8:03 PM
K
AMELEON
2. Press SEARCH once.The Search Codes programming screen appears:
NOTE: If your device or its original remote control does not have a Power key,
select a different test function in this step (e.g., CH+, VOL+, Play, etc.).
5. Aim the remote control at the device (e.g., TV) and press
times. Stop when a working code performs the test function selected in
step 4. If desired, use
NOTE: In the search mode, the remote control sends IR codes from its
library to the selected device, starting with the most popular code first.
6. To lock the code, press OK once.The two bottom IR segments flash twice.
7. To search for codes of your other devices, repeat steps 3 to 6.
8. To exit programming, press HOME twice. The display returns to the last-
selected device menu screen.

CHECKING THE CODES

If you have set up the remote control using the Searching For Your Code
procedure (on the left), you may need to find out which code is operating
your equipment. For example, to find out which code is operating your TV:
1. Press and hold SETUP until the two bottom IR
segments flash twice. The Program Keys
appear as SETUP flashes repeatedly.
20
8-D R
EVICE EMOTE WITH
3. Press a device key once (e.g., TV). The
selected device key animates.The
device's Main Menu screen appears
with the HOME key still displayed.
Press POWER once to select it as the
4.
search test function.The Search
Programming screen appears again.
NOTE: With POWER as the search test
function, a "Power On" IR command is
sent to the device each time a test code is
sent.As a confirmation, the IR segments
display an outgoing animation.
to try a previous code.
RF
one or more
Checking The Codes