Toshiba TOSVERT VF-AS3 Instruction Manual page 5

■ Wiring - Installation
• Do not use the option if it is damaged or any part of it is missing.
Operating the defective product can result in electric shock or fire.
For repairs, call your Toshiba distributor.
• Do not connect any wire other than applicable wire to the option.
This can result in malfunction or accident.
• Do not pull the cable and the connector connected to the option.
Prohibited
This can result in damage or malfunction.
• Do not touch the metal part of the power circuit terminals when connecting the connector to the
option.
This can result in injury.
• The following steps must be performed before wiring and installation.
Turn off all input power, wait at least 15 minutes, and confirm that the charge lamp of the
inverter is no longer lit.
If steps above are not properly performed, this can result in electric shock.
• Use an emergency stop device and an additional safety device in your system to prevent
Mandatory
serious accident due to the option malfunctions.
action
Usage without any emergency stop device or any additional safety device can result in accident
or injury.
WARNING
I-3
E6582148
I
3
9
I. Safety precautions