Advertisement
WT03384X02
CITY MULTI Control System
ME Remote Controller
Instruction Book
Thank you for purchasing a Mitsubishi CITY MULTI system.
G To use your CITY MULTI system correctly and safely, please read this book before use.
G After reading this book, keep it and the installation manual in a place where the final user can see them at anytime.
G When the end user has changed, forward this book and the instruction manual to the new final user.
G Do not try to install or move this system by yourself. (Safety and functions cannot be ensured)
1
Safety Precautions
G The following two symbols are used to dangers that may be caused by incorrect use and their degree:
WARNING
This symbol denotes what could lead to serious injury or death if you misuse the PAR-F27MEA-US.
CAUTION
This symbol denotes what could lead to a personal injury or damage to your property if you misuse the PAR-F27MEA-US.
Ask your dealer or technical representative to install the unit.
Any deficiency caused by your own installation may result in an electric shock
or fire.
Securely install in a place which can withstand the weight of the con-
troller.
If it is not enough, the controller may drop and cause an injury.
Make sure that the controller is connected to a rated power supply.
If the controller is not connected to a rated power supply, it may cause a fire
or damage to the controller.
Stop the operation if any malfunction occurs.
If malfunction occurs (burning smell, etc.) stop the operation and turn off the
power supply. Contact the your dealer or technical representative immediate.
If the controller continues to operate after a malfunction occurs, this may
cause damage, electric shock or fire.
Do not install in any place exposed to flammable gas leakage.
Flammable gases accumulated around the body of PAR-F27MEA-US may
cause an explosion.
Do not wash with water.
Doing so may cause an electric shock or a malfunction.
Do not touch any control button with your wet hands.
Doing so may cause an electric shock or a malfunction.
Do not use the controller for special applications.
This product is designed for use with the CITY MULTI CONTROL SYSTEM.
Do not use the system for other air condition management operation or appli-
cations. It may cause malfunctions.
Do not apply insecticide or flammable sprays to the controller.
Do not place flammable spray near the controller and make sure it does not
blow directly on the controller as this may cause in fire.
Do not clean the unit using benzene, thinner or other chemicals.
It may cause discoloration or other damage. If the unit should become par-
ticularly dirty, apply a mild cleaner that has been diluted with water to a soft
cloth and wipe the unit clean. Be sure to wipe away any residual moisture
with a dry cloth.
WARNING
Do not move and re-install the PAR-F27MEA-US yourself.
Any deficiency caused by installation may result in an electric shock or fire.
Ask your distributor or special vendor for moving and installation.
To dispose of this product, consult your dealer.
Never modify or repair the PAR-F27MEA-US by yourself.
Any deficiency caused by your modification or repair may result in an electric
shock or fire.
Consult with your dealer about repairs.
Stop the operation immediately and notify the your dealer if an error
code is displayed or malfunction occurs.
Fire or damage may cause it the controller is operated in this condition.
CAUTION
Do not use in any special environment.
Using in any place exposed to oil (including machine oil), steam and sulfuric
gas may deteriorate the performance significantly or give damage to the com-
ponent parts.
Do not press any control button using a sharp object.
Doing so may cause an electric shock or a malfunction.
Operate the controller within the specified temperature range.
Observe the specified temperature range when operating the controller. If
the controller is used outside the specified temperature range, it may cause
serious damage. Be sure to check the operation temperature range in the
operation manual.
Do not pull or twist the transmission line.
It may cause a fire or malfunction.
Do not dismantle the unit.
It is dangerous to touch the internal circuit board. It may cause a fire or mal-
function.
PAR-F27MEA-US
1
Advertisement
Table of Contents
Related Manuals for Mitsubishi Electric PAR-F27MEA-US
Summary of Contents for Mitsubishi Electric PAR-F27MEA-US
-
Page 1: Safety Precautions
This symbol denotes what could lead to serious injury or death if you misuse the PAR-F27MEA-US. CAUTION This symbol denotes what could lead to a personal injury or damage to your property if you misuse the PAR-F27MEA-US. WARNING Ask your dealer or technical representative to install the unit. -
Page 2: Part Names
FILTER Mode selection button (Normally not used) LOUVER VENTILATION CHECK TEST TEST RUN button TIMER SET PAR-F27MEA-US Time selection buttons (Normally not used) (M) Return (L) Ahead Airflow button Open the door. Louver button OPERATION SECTION Built-in temperature sensor position NOTE When an operation button is pressed, if the indoor unit does not have that function, “NOT AVAILABLE”... -
Page 3: How To Operate
AIR DIRECTION FILTER LOUVER VENTILATION CHECK TEST TIMER SET PAR-F27MEA-US When starting operation When you want to change the set temperature I Press the [ON/OFF] button 1. <When you want to lower the room temperature> I Press the [SET TEMP. ( •... - Page 4 LOUVER VENTILATION CHECK TEST TIMER SET PAR-F27MEA-US When you want to change the wind speed When you want to change the wind direction I While the air conditioner is operating, press the [FAN SPEED] button I While the air conditioner is operating, press the [AIR DIRECTION] button 6.
- Page 5 FUN SPEED AIR DIRECTION FILTER LOUVER VENTILATION ERROR CODE ERROR CODE CHECK TEST • Auto off timer mode TIMER SET PAR-F27MEA-US CENTRALLY CONTROLLED DAILY AUTO AUTO ← Auto off timer mode TIMER AUTO OFF CLOCK Operation stop when 2 hours remain CHECK SET TEMP.
-
Page 6: Daily Timer
FILTER LOUVER VENTILATION CHECK TEST TIMER SET PAR-F27MEA-US When locking/unlocking all buttons I When the [SET TEMP. ( )] button 1 is pressed two seconds successively while pressing the [FILTER] button, all the remote controller buttons are locked or unlocked. -
Page 7: Operation Mode Display Selection Mode
LOUVER VENTILATION 3 ↑ ↓ 2 CHECK TEST 2:[SET TEMP. ( )] button TIMER SET PAR-F27MEA-US Set temperature adjustment range limit mode (cool/dry) 3:[SET TEMP. ( )] button 3 ↑ ↓ 2 ← Set temperature adjustment range limit mode (heat) -
Page 8: Specifications
[PROCEDURE] 1. Set the air conditioner to the off state with the remote controller [ON/OFF] button. The remote controller display shifts to the OFF window display shown at the left. 2. When the [CHECK] and [MODE] buttons 1 are pressed and held down at the same time for two seconds, the remote controller switches to the remote controller function selection mode and the “OPERATION MODE DISPLAY SELECTION MODE”...