Preparation; General Notes; Connecting To A Tv; Connecting To Optional Equipment - Philips DVD701/931 User Manual

Preparation

DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
MAINS
DIG OUT
14 PREPARATION
TV
D C
A
I
AUX/VCR
IN
STEREO OUT
II
TV OUT
R L (CVBS)
AUDIO OUT VIDEO OUT
All

General notes

- Depending on your TV and other equipment you wish to connect, there
are various ways you could connect the player. Possible connections are
shown in the following drawings.
- Please refer to the manuals of your TV, VCR, Stereo System or other
devices as necessary to make the best connections.
- Do not connect your DVD-player via your VCR. The video quality could be
distorted by the copy protection system.
- For better sound reproduction, connect the player's audio out jacks to the
audio in jacks of your amplifier, receiver, stereo or A/V equipment. See

'Connecting to optional equipment'.

Caution: Do not connect the player's audio out jack to the phono
in jack of your audio system.

Connecting to a TV

Connect the SCART to the corresponding connector on the TV using the
SCART cable supplied (A).
If your TV is not equipped with a SCART you can select one of the following
alternative connections:
Video CVBS connection
1
Connect the Video out (CVBS) jack to the video in jack on the TV using
the video cable supplied (C).
2
Connect the audio Left and Right out jacks to the audio left/right in jacks
on the TV (D).
Connecting to optional equipment
Connecting to an amplifier equipped with two channel
analog stereo or Dolby Surround
Connect the audio Left and Right out jacks of the DVD player to the
audio left and right in jack on your amplifier, receiver or stereo system,
using an audio cable (E).
Connecting to an amplifier equipped with two channel
digital stereo (PCM)
1
Connect the player's digital audio out jack (coaxial F) to the
corresponding in jack on your amplifier.
Use an optional digital coaxial cable.
2
You will need to activate the player's digital output (see 'Personal
Preferences').