Samsung ua46d6400un E-Manual page 162

I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting to
Anynet+ device..." appears on
the screen.
◀
The Anynet+ device does not
play.
•
Check if the Anynet+ device is properly connected to the TV and
check if the Anynet+ (HDMI-CEC)
Setup menu.
•
Press the TOOLS button to display the Anynet+ menu and select a
menu you want.
•
Select View TV in the Anynet+ menu.
•
Press the SOURCE button on the TV remote control and select a
non- Anynet+ device.
•
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
•
Use the remote control when the Anynet+ setting or switching to
view mode is complete.
•
You cannot use the play function when
in progress.
English
is set to On in the Anynet+
Plug & Play (initial setup) is
▶